Drill bit Art-Pol AR48418 SDS+ for concrete, 18 mm

Art-Pol AR48418 SDS+ 18 mm is a drill bit engineered for drilling into concrete and masonry. Designed for use with SDS+ chucks and rotary hammers, this 18 mm bit enables the creation of clean anchor holes, dowel installation points and other through or blind holes required in construction, renovation and repair tasks. The bit’s geometry and hardness are intended to provide reliable performance when working with reinforced concrete, bricks and concrete blocks.

Advantages

The 18 mm SDS+ design ensures fast and secure mounting in compatible rotary hammers, reducing play during impact drilling. Hardened cutting edges and a tip shape optimized for masonry reduce walking at the start of drilling and support stable penetration into concrete. The shaft and flute geometry facilitate efficient dust removal, which improves drilling speed and helps maintain tool life. The bit is suitable for repeated use in demanding conditions typical for professional and DIY construction work.

Suitable for

• Drilling anchor holes in concrete and masonry
• Installing dowels, anchors and fastening systems
• Creating holes for electrical and plumbing penetrations in block or brick walls
• General construction, renovation and repair tasks requiring durable concrete drilling

Key specifications

• Shank type: SDS+
• Drill diameter: 18 mm
• Intended materials: concrete, reinforced concrete, brick, concrete block
• Recommended tool type: rotary hammer with SDS+ chuck
• Typical applications: anchor and dowel holes, through and blind holes in masonry

How to use

Fit the bit securely into an SDS+ rotary hammer according to the tool manufacturer’s instructions. Mark the drilling point and start drilling at low speed to establish a precise position, then apply steady pressure while allowing the hammer action to perform the cutting. Withdraw the bit periodically to clear dust and debris from the hole and to avoid overheating. Use appropriate personal protective equipment, including eye protection, gloves and hearing protection. Match drill depth to anchor or dowel length, using a depth stop if required.

Usage recommendations

Use the Art-Pol 18 mm SDS+ bit with a rotary hammer rated for the intended drill diameter and material. For best results in reinforced concrete, start with a pilot point and progress using steady pressure; avoid excessive axial force that can damage the bit or tool. Clean holes before inserting anchors and select anchor types suited to the drilled substrate.