Bathroom exhaust fan AWENTA Loop WL100, two-speed, Ø100 mm, 42/70 m³/h, 4/6 W, 230 V, white

AWENTA Loop WL100 is a compact two-speed bathroom exhaust fan with a 100 mm duct connection, designed to remove moisture and odors from bathrooms, toilets and small utility rooms. The unit delivers airflow of 42 m³/h on the low setting and 70 m³/h on the high setting while consuming 4 W and 6 W respectively at 230 V. Its axial design and modest dimensions allow wall or ceiling mounting where a small, energy-efficient extractor is required.

Advantages

The fan combines low power consumption with two selectable airflow levels to balance energy use and ventilation needs. Its axial design provides straightforward installation into standard Ø100 mm ducts and the white finish integrates with common bathroom interiors. Low electrical load and simple mechanical construction reduce running costs and maintenance requirements.

Suitable for

• Ventilation of bathrooms and toilets in apartments and houses
• Small utility rooms and laundry areas requiring moisture extraction
• Replacement or upgrade of compact wall- or ceiling-mounted exhaust fans
• Applications where a quiet, low-power axial fan with Ø100 mm connection is needed

When it may not be suitable

This fan is intended for small to medium-sized rooms and may not provide adequate airflow for large bathrooms, wet rooms or commercial washrooms that require higher extraction rates. It is not designed for continuous high-load industrial ventilation or for duct runs with significant length or complex bends without verifying pressure losses.

Key specifications

• Airflow: 42 m³/h (low), 70 m³/h (high)
• Power consumption: 4 W (low), 6 W (high)
• Supply voltage: 230 V
• Duct connection diameter: Ø100 mm
• Mounting: wall or ceiling
• Color/finish: white
• Fan type: axial, two-speed

How to use

Install the AWENTA Loop WL100 into a standard Ø100 mm duct opening in a wall or ceiling following local electrical and building regulations. Connect the fan to a 230 V supply and wire the two-speed control according to the manufacturer's wiring diagram or a qualified electrician's instructions. Select the low setting for continuous background ventilation and the high setting for rapid moisture or odor extraction after showers or cleaning. Ensure the external venting path is unobstructed to allow efficient discharge of exhaust air.

What to consider before purchase

• Room size and required extraction rate — verify 42/70 m³/h suit the space
• Compatibility with existing Ø100 mm ductwork and mounting location
• Availability of a 230 V power connection and appropriate control switch
• Noise expectations — check acoustic specifications if quiet operation is critical

Usage recommendations

For typical bathrooms, use the low setting for continuous ventilation and switch to high for 10–20 minutes after showers to reduce humidity quickly. Periodically inspect and clean the fan grille and impeller to maintain airflow and efficiency.