Drill bit set AWTools SDS Plus 10 x 600 mm QUADRO XTREME BLACK LINE

AWTools QUADRO XTREME BLACK LINE SDS Plus drill bit set includes ten 600 mm long bits designed for use with SDS Plus rotary hammers. These long-reach bits are made for drilling deep holes in concrete, masonry and similar mineral materials. The set is suitable for construction and renovation work where extended drilling depth is required, and it ensures compatibility with standard SDS Plus chucks.

Advantages

The QUADRO XTREME BLACK LINE bits feature a long 600 mm length that allows deep anchoring and through-drilling without changing to extension rods. Their SDS Plus shank provides secure tool engagement and quick bit changes. Optimized geometry and hardened tip material improve drilling speed and reduce wear when working in concrete and masonry. The uniform length across the set simplifies tool selection for repetitive deep-drilling tasks.

Suitable for

• Deep anchoring holes in reinforced and non-reinforced concrete
• Through-holes in masonry and brickwork
• Installation of long fasteners, anchors and dowels
• Renovation and construction tasks requiring extended reach drilling

Key specifications

• Shank type: SDS Plus compatible
• Bit length: 600 mm
• Set quantity: 10 pieces
• Intended material: concrete, masonry and similar mineral substrates
• Surface finish: black protective coating

How to use

Select a suitable diameter bit from the set and insert the SDS Plus shank fully into the rotary hammer chuck until it locks. Set the hammer function on the tool for drilling in concrete or masonry. Hold the tool steady, start drilling at low speed to create a guide, then apply steady pressure and allow the hammer action to advance the bit. Withdraw periodically to clear dust when drilling deep holes. After finishing, remove the bit by pulling and twisting according to the tool manufacturer's instructions.

Usage recommendations

Use personal protective equipment such as safety glasses, hearing protection and dust mask. For reinforced concrete, use slightly increased pressure and progress in stages; clear debris frequently to maintain drilling efficiency. Store the bits dry and clean to protect the coating and inspect tips before use for signs of wear.