Drill Bit AWTools SDS Plus 10 x 260 mm QUADRO XTREME BLACK LINE

AWTools SDS Plus 10 x 260 mm QUADRO XTREME BLACK LINE is a rotary hammer drill bit designed for use with SDS Plus hammer drills. With a 10 mm diameter and 260 mm overall length, this bit is intended for drilling in masonry and concrete where deeper or through holes are required. The SDS Plus shank ensures secure coupling with compatible rotary hammers, while the QUADRO XTREME BLACK LINE design focuses on efficient material removal and stable drilling in construction tasks such as anchor installation and cable routing.

Advantages

The QUADRO XTREME BLACK LINE geometry provides balanced cutting performance and reduced wandering at the start of drilling, enabling accurate hole placement. The 260 mm length allows for deeper penetration without changing to extension accessories, and the 10 mm diameter is suitable for common dowels and anchors. The SDS Plus shank guarantees quick, tool-free bit changes and reliable power transfer from the hammer drill to the cutting head.

Suitable for

• Drilling anchor and dowel holes in concrete and masonry
• Cable routing and conduit preparation through walls
• General construction and renovation drilling tasks
• Applications requiring deeper or through holes up to 260 mm length

Key specifications

• Shank type: SDS Plus compatible
• Diameter: 10 mm
• Total length: 260 mm
• Intended material: concrete and masonry
• Application: rotary hammer drilling (hammer function)

How to use

Install the bit into an SDS Plus compatible rotary hammer according to the drill manufacturer’s instructions, ensuring the shank locks securely. Select the hammer drilling mode and start at low speed to position the bit accurately, then increase power as appropriate for the material. Apply steady forward pressure without forcing the bit; allow the hammer action to perform the cutting. Withdraw the bit periodically to clear dust from the hole when drilling deep or through holes. After use, clean the bit and store it in a dry place to prevent corrosion.

Usage recommendations

Use appropriate personal protective equipment such as eye and hearing protection and dust extraction or a vacuum when drilling in concrete or masonry. Match drill speed and impact force to the material to extend bit life. For continuous deep drilling, withdraw occasionally to clear debris and avoid overheating.