Concrete float AWTools AW30070 — hand float for finishing concrete surfaces

AWTools AW30070 is a hand concrete float designed for finishing and smoothing fresh and slightly set concrete surfaces. Constructed from a hardened aluminium alloy with a trapezoid-shaped profile, the tool provides a rigid, lightweight platform for consolidating and leveling cement after screeding. The built-in thumb groove improves grip and control, while double-sided plastic shock-absorbing end plugs protect the edges and reduce impact during handling. The float is intended for on-site concrete, plaster and gypsum work and is manufactured in Poland.

Advantages

The aluminium alloy construction combines increased hardness with low weight, making the float easy to manoeuvre while resisting bending under normal finishing loads. The trapezoid profile gives a stable contact surface for compacting and closing pores in fresh concrete. An integrated thumb groove enhances operator grip for precise pressure control, and double-sided shock-absorbing end plugs extend tool life and protect finished edges. The 120 cm length and modest weight allow efficient coverage of medium-sized areas without excessive fatigue.

Suitable for

• Finishing and smoothing of fresh concrete surfaces after screeding
• Leveling and consolidating plaster and gypsum in small repair jobs
• On-site construction tasks requiring a lightweight, rigid hand float
• Preparing concrete surfaces for further troweling or curing

Key specifications

• Material: hardened aluminium alloy
• Profile shape: trapezoid
• Length: 120 cm
• Profile height: 9.5 cm
• Profile width: 2 cm
• Weight: 1 kg
• End protection: double-sided plastic shock-absorbing plugs
• Grip feature: built-in thumb groove
• Country of manufacture: Poland

How to use

Use the float after screeding to consolidate and level the concrete surface. Hold the tool by the thumb groove and apply even pressure while moving the float across the surface in overlapping passes. For slightly set materials such as plaster or gypsum, perform firm but controlled strokes to close surface pores and produce a uniform finish. Maintain a consistent angle and avoid excessive pressure that could gouge the surface; reverse direction or adjust pressure as the material sets to achieve the desired texture.

Usage recommendations

Before use, inspect the float for damage to the profile or end plugs. Clean the tool after each use to prevent material buildup on the aluminium surface. For best results, use the float on properly prepared, leveled concrete and follow standard curing procedures after finishing.