Concrete float AWTools AW30072 — hand float for smoothing concrete surfaces

AWTools AW30072 — hand float for smoothing concrete surfaces is a 180 cm aluminium-alloy float with a trapezoid-shaped profile designed for manual finishing of fresh concrete, cement screeds and slightly dried materials such as plaster or gypsum. The tool provides a flat working face for levelling and removing surface imperfections, and its built-in thumb groove improves grip and control during on-site concrete work and repair tasks. Double-sided plastic shock-absorbing end plugs protect edges and reduce impact when setting the float down.

Advantages

The float is made of an aluminium alloy with increased hardness for improved durability while remaining lightweight at 1.5 kg. Its trapezoid profile (height 9.5 cm, width 2 cm) offers a stable working surface for consistent levelling across slabs. An integrated thumb groove enhances handling and precision, and the double-sided plastic end plugs extend tool life and protect finished surfaces. Manufactured in Poland to standard production quality.

Suitable for

• Smoothing and levelling fresh concrete and cement screeds
• Finishing slightly dried plaster or gypsum surfaces
• On-site repair and maintenance of floor slabs and pavements
• Manual concrete work by builders and DIY users

Key specifications

• Material: aluminium alloy with increased hardness
• Overall length: 180 cm
• Profile shape: trapezoid
• Profile height: 9.5 cm
• Profile width: 2 cm
• Weight: 1.5 kg
• End protection: double-sided plastic shock-absorbing plugs
• Grip feature: built-in thumb groove for improved handling
• Country of manufacture: Poland

How to use

Hold the AWTools AW30072 with both hands using the built-in thumb groove to maintain a steady, controlled motion. Move the float across the fresh or slightly set surface using long, even strokes to level high spots and fill low areas. Apply consistent pressure and maintain a shallow angle between the float face and the surface to produce an even finish. For larger areas work methodically in overlapping passes to avoid ridges and ensure uniformity.

Usage recommendations

Use the float on concrete or screed surfaces once the bleed water has evaporated but before the material has fully set. Keep the float clean and inspect the plastic end plugs before each use; replace plugs if damaged. For textured or final-polish finishes follow with appropriate finishing tools after initial levelling. Store the tool in a dry place to prevent corrosion and preserve the aluminium alloy surface.