AWTools AW30379 Tile Leveling Clips 2.0mm, 100 pcs

The AWTools AW30379 tile leveling clips are essential components for professional tiling projects, designed to ensure perfectly even surfaces by preventing tile movement during the adhesive setting process. These clips are engineered for a 2.0mm joint width and are compatible with tiles ranging from 7mm to 15mm in thickness. By maintaining consistent spacing and height, they help achieve a professional, gap-free finish on both floor and wall installations.

Advantages

Using these leveling clips significantly reduces installation time and increases overall efficiency during tiling tasks. The system effectively adjusts the height of the tiles and holds their edges firmly in place throughout the curing process of the adhesive. The profiled leg of the clip is designed to compensate for tension when the wedge is inserted, while the flexible plastic construction ensures durability and ease of use. This system prevents common issues such as lippage and unevenness, resulting in a perfectly flat surface across various materials including marble, stone, granite, and porcelain.

Suitable for

• Installation of ceramic and porcelain floor tiles
• Wall tiling projects in bathrooms and kitchens
• Laying large format tiles
• Working with natural stone, marble, and granite

When it may not be suitable

These clips are not suitable for tiles thinner than 7mm or thicker than 15mm, as the clip dimensions are specifically calibrated for this range. Additionally, they are not intended for use with very narrow grout lines smaller than 2.0mm.

Key specifications

• Joint width: 2.0mm
• Compatible tile thickness: 7-15mm
• Material: Flexible plastic
• Quantity: 100 pieces per pack
• Application: Walls and floors

How to use

To use the system, place the clip under the tile during the initial installation. Once the adjacent tile is placed, insert the leveling wedge into the clip opening. Use a specialized tool to tighten the wedge until the surfaces of the tiles are perfectly level with each other. Allow the adhesive to cure completely before removing the clips. The clips are designed for single use and can be snapped off after the adhesive has set, while the wedges can be collected and reused for future projects.

What to consider before purchase

• Ensure your tile thickness falls within the 7-15mm range.
• Verify that a 2.0mm grout line meets your design requirements.
• Calculate the total number of clips needed based on the tile size and area to be covered.
• Note that wedges are sold separately or are required to complete the system.

Usage recommendations

For the best results, ensure the adhesive is applied evenly beneath the tiles. Always remove the clips only after the adhesive has fully hardened to prevent shifting.