Mixing Paddle AWTools AW MIESZADŁO M14 x 100mm x 540mm AW30460 — M14 shaft, 100 mm blade, 540 mm length

Hand-held mixing paddle AWTools AW MIESZADŁO AW30460 is a professional accessory for electric drills and mixers featuring an M14 threaded shaft, a 100 mm diameter blade and a 540 mm overall length. Made of high-quality zinc-plated steel with strong welds, the paddle is designed for mixing paints, adhesives, plasters, fillers, screeds and mortar to produce even, lump-free blends. The open blade geometry and two helical ribbons promote effective circulation of materials and reduce splashing during operation.

Advantages

The zinc-plated steel construction offers corrosion resistance and ease of cleaning, while high-quality welds improve durability and service life. The M14 threaded shaft provides compatibility with a wide range of electric mixers and drills. Two helical ribbons lift and circulate the mixture, improving homogeneity and reducing air entrapment. The 100 mm blade diameter and 540 mm length give a balance between mixing capacity and maneuverability in buckets and containers commonly used on construction and renovation sites.

Suitable for

• Mixing tile adhesive and cement-based mortars
• Preparing plaster, fillers and screeds
• Mixing paint, primers and coatings
• Combining powdered compounds with water or liquid additives

Key specifications

• Shaft thread: M14 (compatible with standard electric mixers and drill adapters)
• Blade diameter: 100 mm
• Overall length: 540 mm
• Material: zinc-plated steel
• Blade geometry: open design with two helical ribbons for upward material flow
• Construction: welded joints for increased strength and easier cleaning

How to use

Attach the paddle to an electric drill or mixer with an M14 connection and ensure it is tightened securely. Place the paddle into the container with the material, start the mixer at low speed to avoid splashing, then increase speed as required for thorough mixing. Move the paddle gently up and down and around the container to ensure all powder and liquid components are fully incorporated. After use, stop the tool and allow the mixture to settle before removing the paddle; clean immediately to prevent material hardening.

Usage recommendations

For best results, use a drill or mixer with variable speed control and select a low to medium speed when beginning mixing. Avoid running the paddle at maximum speed in small containers to reduce splatter. Clean the paddle after each use while the material is still wet to maintain performance and prolong service life.