Drill bit AWTools AWTOOLS WIERTŁO SDS PLUS 8 x 110 mm

AWTools SDS Plus drill bit, 8 x 110 mm, is designed for drilling into concrete, masonry and similar building materials with SDS Plus rotary hammer drills. The 8 mm diameter and 110 mm overall length provide a compact solution for creating through-holes and anchor holes in tight spaces or when a short drilling depth is required. The SDS Plus shank ensures a secure connection with compatible rotary hammers and efficient transfer of impact energy for rotary-percussive drilling.

Advantages

This AWTools SDS Plus drill bit combines a compact 8 mm cutting diameter with a robust flute and tip geometry optimized for percussion drilling. The SDS Plus shank design provides stable retention and fast bit changes in compatible rotary hammers. The bit’s length and diameter make it suitable for precise drilling and for use where minimal overhang and reduced bending are important.

Suitable for

• Drilling anchor and fixing holes in concrete
• Creating openings in masonry and brickwork
• Short-depth drilling where an 110 mm overall length is sufficient
• Use with SDS Plus rotary hammer drills for percussion and rotary-percussive modes

Key specifications

• Shank type: SDS Plus compatible shank for rotary hammers
• Diameter: 8 mm cutting diameter
• Overall length: 110 mm
• Intended materials: concrete, masonry, brick and similar mineral building materials
• Application: rotary-percussive drilling (hammer drilling)

How to use

Insert the AWTools SDS Plus bit into the rotary hammer’s chuck until it locks, ensuring the shank is clean and free of debris before assembly. Select the rotary-percussive (hammer) mode on the drill when working in concrete or masonry. Begin drilling at low speed to create a guide, then apply steady pressure and increase speed as appropriate for the material. Periodically withdraw the bit to clear dust from the hole and prevent clogging; for longer drilling tasks allow the bit to cool and inspect for wear. Use appropriate personal protective equipment, such as eye protection, ear protection and dust control measures.

Usage recommendations

Use the 8 x 110 mm bit for short-depth anchor and fixing holes; for deeper or larger-diameter holes choose a longer or larger-diameter bit. Ensure the rotary hammer is set to SDS Plus compatible and that impact settings match the material hardness to prolong bit life.