Drill bit AWTools AWTOOLS WIERTŁO SDS Plus 8 x 110 mm (AW43510)

SDS Plus drill bit AWTools AWTOOLS WIERTŁO 8 x 110 mm is a masonry bit designed for use with SDS Plus rotary hammers. The 8 mm diameter and 110 mm overall length make it suitable for medium-duty drilling in concrete, brick and natural stone. The SDS Plus shank provides fast, secure mounting in compatible hammer drills and maintains rotational and impact transfer for consistent drilling performance during renovation, construction and installation tasks.

Advantages

The drill bit features a hardened carbide tip and spiral flute geometry that evacuates dust efficiently while maintaining cutting performance. The SDS Plus shank design allows quick tool changes without additional adapters and ensures reliable locking in SDS Plus chucks. The length and diameter combination balances reach and rigidity for controlled drilling in masonry substrates.

Suitable for

• Drilling holes for wall plugs and anchors in concrete and brick
• Installing electrical boxes, conduit and piping through masonry
• Renovation tasks requiring repeated medium-diameter masonry holes
• Light construction and mounting work in stone or block walls

Key specifications

• Diameter: 8 mm
• Overall length: 110 mm
• Shank type: SDS Plus
• Tip material: carbide cutting tip
• Application: masonry drilling (concrete, brick, stone)

How to use

Insert the SDS Plus shank into a compatible rotary hammer and lock it according to the tool manufacturer's instructions. Select rotation with hammering mode for concrete or stone; for softer brick, use a lower impact setting if available. Start drilling at low speed to position the bit, then apply steady pressure and let the tool's hammering action do the work. Withdraw the bit periodically to clear dust from the hole and prevent clogging of the flutes.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses, hearing protection and dust mask. For precise anchor holes, mark and pilot the position before drilling and ensure the chosen drill depth matches the fastener dimensions. Replace the bit when wear reduces cutting efficiency or when the carbide tip becomes chipped.