Drill Bit AWTools SDS Plus 10 x 160 mm Quadro Xtreme Black Line

AWTools SDS Plus 10 x 160 mm Quadro Xtreme Black Line is a purpose-built masonry drill bit intended for use with SDS Plus rotary hammers. The 10 mm diameter and 160 mm overall length make it suitable for standard holes in concrete, brick and other common masonry materials. The Quadro tip geometry is engineered to improve cutting efficiency and dust evacuation, while the Black Line surface treatment increases resistance to corrosion and wear during repeated use.

Advantages

The Quadro tip geometry reduces the need for excessive feed pressure by optimizing the cutting angles and allowing faster penetration in abrasive materials. The SDS Plus shank ensures secure fitment and reliable power transfer in compatible rotary hammers. The Black Line finish provides an additional protective layer that helps resist surface wear and corrosion, extending usable life under jobsite conditions.

Suitable for

• Drilling 10 mm diameter holes in concrete and masonry
• Anchoring and fixing installations in walls and floors
• Renovation and construction tasks requiring repeated drilling
• Use with SDS Plus rotary hammers for hammer-drilling applications

When it may not be suitable

This drill bit is not intended for use in smooth-shank drills or drill drivers that do not accept SDS Plus bits. It is not designed for extended drilling in reinforced concrete where specialized rebar-cutting or carbide-tipped bits for rebar are required. For precise shallow holes in delicate materials such as ceramic tiles or glass, a dedicated masonry or tile drill bit with appropriate tip geometry should be used instead.

Key specifications

• Diameter: 10 mm
• Overall length: 160 mm
• Shank type: SDS Plus
• Tip geometry: Quadro tip for improved cutting and dust removal
• Surface finish: Black Line protective coating
• Primary materials: designed for concrete and masonry

How to use

Select a compatible SDS Plus rotary hammer and ensure the tool is switched off before inserting the bit. Insert the SDS Plus shank into the chuck until it locks in place. Mark the drilling position and start drilling at low speed to establish the hole, then apply steady pressure and the hammer function as required for masonry. Withdraw the bit periodically to clear debris and prevent overheating. After use, wipe the bit clean and store it in a dry place to preserve the Black Line finish.

What to consider before purchase

• Confirm your rotary hammer accepts SDS Plus shanks.
• Match the 10 mm diameter and 160 mm length to the hole depth and fastener size required.
• Consider whether you need rebar-capable or tile-specific bits for specialized tasks.
• Evaluate expected drilling frequency to determine if a higher-grade or carbide-series bit is preferable.

Usage recommendations

Use the AWTools SDS Plus Quadro Xtreme Black Line with an appropriate SDS Plus rotary hammer, apply steady axial pressure without forcing, and clear debris regularly for consistent drilling performance and longer bit life.