Drill Bit AWTools SDS Plus 14 x 600 mm — QUADRO XTREME BLACK LINE

AWTools SDS Plus drill bit QUADRO XTREME BLACK LINE, 14 x 600 mm, is designed for use with rotary hammers that accept SDS Plus shanks. The bit is intended for drilling in concrete, masonry and other hard mineral materials where a longer reach is required. Its extended 600 mm length allows deep hole drilling and through-drilling in construction, installation and renovation tasks while the 14 mm diameter provides a balance between hole size and material removal rate.

Advantages

The SDS Plus shank ensures fast and secure mounting in compatible rotary hammers and reduces play during operation. The extended length offers access to deep drilling points without additional extensions. The QUADRO XTREME BLACK LINE geometry is engineered to maintain drilling precision and to resist wear when working with hard mineral substrates. The bit’s construction supports effective dust evacuation and stable drilling progress in demanding conditions.

Suitable for

• Drilling holes in concrete for anchors and dowels
• Through-drilling in masonry and brick walls
• Installation tasks requiring deep or hard-to-reach holes
• Construction and renovation where SDS Plus rotary hammers are used

Key specifications

• Shank type: SDS Plus for quick, secure insertion
• Diameter: 14 mm suitable for medium-sized anchors and fittings
• Overall length: 600 mm for deep and through holes
• Intended materials: concrete, masonry and other hard mineral materials
• Geometry: QUADRO XTREME BLACK LINE design for stability and wear resistance

How to use

Select a rotary hammer with an SDS Plus chuck and set it to the appropriate drilling mode for concrete or masonry. Insert the drill bit securely until it locks in the chuck. Mark the drilling position and start drilling at low speed to establish the hole, then apply steady pressure and maintain the tool perpendicular to the work surface. For deep or through holes, periodically withdraw the bit to clear debris and allow cooling. Use appropriate personal protective equipment such as safety glasses, hearing protection and dust mask when drilling mineral materials.

Usage recommendations

Use the bit with rotary hammers rated for the required power and impact energy; avoid excessive side loads and overheating. For best performance, keep the bit clean from accumulated dust and, when possible, use dust extraction or wet drilling methods where applicable. Inspect the bit before use and replace it if the cutting edges are worn or the shank is damaged.