SDS‑MAX Drill Bit AWTools 32×800×940 mm for SDS‑MAX Rotary Hammers

SDS‑MAX Drill Bit AWTools 32×800×940 mm is a long‑reach SDS‑MAX bit designed for drilling 32 mm diameter holes in concrete, masonry and similar building materials. The bit suits rotary hammers with SDS‑MAX chucks and is intended for creating deep or through‑holes where reliable percussion and efficient material removal are required. Its length and cutting geometry are targeted at tasks that need a combination of depth and consistent hole diameter.

Advantages

The AWTools SDS‑MAX drill bit features a robust shank compatible with SDS‑MAX systems, ensuring secure coupling and efficient transfer of hammering energy. Its flute design facilitates reliable dust and debris evacuation from deep holes, reducing jamming and improving drilling speed. Hardened cutting edges and balanced geometry promote longer service life under heavy use and help maintain consistent hole dimensions in concrete and masonry.

Suitable for

• Drilling 32 mm through‑holes in concrete and reinforced concrete
• Creating deep anchor or dowel holes for mechanical fasteners
• Installation work in masonry, blockwork and similar substrates
• Renovation and structural modification tasks requiring precise, long holes

Key specifications

• Nominal diameter: 32 mm
• Working length: 800 mm
• Total length: 940 mm
• Shank type: SDS‑MAX compatible
• Suitable materials: concrete, masonry and similar mineral building materials
• Intended tool type: SDS‑MAX rotary hammer

How to use

Fit the drill bit into the SDS‑MAX chuck of a compatible rotary hammer following the tool manufacturer's instructions until it locks securely. Select an appropriate hammering mode and, if available, use a controlled low‑speed start to establish the drilling point before increasing power. Apply steady axial pressure without forcing the bit; allow the hammer action to do the work. Periodically withdraw the bit to clear dust and debris from the hole to maintain efficient cutting and prevent overheating.

Usage recommendations

Use personal protective equipment such as safety glasses, hearing protection and dust mask when drilling. For reinforced concrete, verify rebar locations and proceed with care. Match drilling speed and force to substrate hardness, and replace the bit when cutting performance or hole quality declines.