Drill Bit AWTools SDS‑MAX 24 x 800 x 940 mm for Rotary Hammers, AWTools AW43841

SDS‑MAX drill bit AWTools 24 x 800 x 940 mm is a long-reach carbide-tip bit engineered for use with rotary hammers that accept SDS‑MAX shanks. With a 24 mm diameter, 800 mm working length and 940 mm overall length, this bit is intended for deep drilling tasks in concrete, masonry and natural stone. It is suitable for creating anchor holes, through‑holes and other heavy‑duty construction openings where extended penetration and robust cutting performance are required.

Advantages

The AWTools SDS‑MAX 24 mm drill delivers consistent drilling speed and reduced wandering due to its precisely ground carbide tip and flute geometry. Its extended working length allows access to deep drilling positions without multiple bit changes, while the SDS‑MAX shank ensures secure coupling to compatible rotary hammers for reliable torque transfer. The bit’s design supports efficient dust removal and stable cutting in reinforced concrete and dense masonry.

Suitable for

• Drilling deep anchor holes in concrete for heavy fixtures
• Through‑hole drilling for pipe and cable passages
• Core and clearance holes in masonry and natural stone
• Construction and renovation tasks requiring extended reach

Key specifications

• Diameter: 24 mm
• Working length: 800 mm
• Total length: 940 mm
• Shank type: SDS‑MAX
• Tip material: carbide tip for masonry/concrete
• Application materials: concrete, masonry, stone

How to use

Fit the AWTools SDS‑MAX drill bit into the rotary hammer’s SDS‑MAX chuck until it locks. Select an appropriate hammering/drilling mode per the rotary hammer’s instructions and start drilling with steady axial pressure, allowing the tool’s percussive action to do the work. Periodically withdraw the bit to clear debris and improve dust evacuation, especially when drilling deep holes. Keep the bit aligned with the intended hole axis to minimize deflection and ensure accurate hole placement.

Usage recommendations

Use appropriate personal protective equipment including eye protection, hearing protection and dust mask. For drilling in reinforced concrete, use controlled feed and consider core or segmented drilling if encountering large rebar. Match drill speed and hammer settings to material hardness and consult the rotary hammer manufacturer’s guidance for optimal performance with SDS‑MAX bits.