Drill Bit AWTools SDS‑MAX AWTOOLS WIERTŁO KWADRAT 25 × 600 × 740 mm

AWTools SDS‑MAX AWTOOLS WIERTŁO KWADRAT 25 × 600 × 740 mm is a rotary hammer drill bit designed for SDS‑MAX chucks. With a 25 mm square cross‑section profile and overall length of 740 mm (working length 600 mm), this bit is intended for heavy‑duty masonry, concrete and stone work where chiseling and demolition with a square profile is required. It fits SDS‑MAX rotary hammers and is suited to breaking, slotting and enlarging holes in construction and renovation tasks.

Advantages

The square profile delivers consistent, predictable chiseling performance and improved material removal when compared with round bits in certain demolition and slotting operations. Manufactured for use with SDS‑MAX systems, the shank engages securely for efficient hammer impact transfer. The combination of 600 mm working length and 740 mm overall length provides extended reach while maintaining rigidity for controlled operation in deeper or recessed areas.

Suitable for

• Chiseling and slotting in concrete and masonry
• Breaking and enlarging holes in stone and brick
• Construction and renovation demolition tasks
• Work requiring a square cross‑section profile for guided removal
• Applications using SDS‑MAX rotary hammers

Key specifications

• Cross‑section: square profile
• Nominal diameter: 25 mm
• Working length: 600 mm
• Overall length: 740 mm
• Shank type: SDS‑MAX compatible
• Intended material: masonry, concrete, stone

How to use

Select an SDS‑MAX rotary hammer appropriate for the bit diameter and the workpiece. Insert the SDS‑MAX shank into the chuck according to the tool manufacturer’s instructions until it locks. Use the hammer or hammer‑drill mode depending on the machine and task. For chiseling or slotting, position the square profile against the work surface and apply controlled pressure while guiding the tool—avoid excessive lateral force that could damage the bit or tool. For breaking or enlarging holes, use short, steady hammering strokes and reposition the bit as needed to remove material evenly. Always allow the tool to do the work and avoid forcing the bit.

Usage recommendations

Use appropriate personal protective equipment including safety glasses, hearing protection, gloves and dust mask. For best performance and longevity, keep the shank clean and free of debris before insertion, periodically inspect the bit for wear or deformation, and match the machine power and operating mode to the task. When working in reinforced concrete, use care to avoid prolonged contact with reinforcing steel to prevent premature wear.