Angle grinder accessory AWTools AW45300, weight 1.3 kg

AWTools AW45300 is an angle grinder accessory made of carbon steel with a diamond powder coating and laser-welded construction. It is supplied as a replacement or add-on part for compatible angle grinders and is intended for dry cutting tasks. The accessory weighs 1.3 kg, a factor to consider for handling, tool balance and mounting during cutting, grinding and surface-preparation jobs.

Advantages

The laser-welded bond between the carbon steel body and the diamond-coated edge provides increased durability and resistance to wear. The diamond powder coating enables effective and precise cutting performance on hard materials while helping to extend service life. The accessory is designed for dry cutting, eliminating the need for water cooling in suitable applications and simplifying field use.

Suitable for

• Cutting concrete and reinforced concrete
• Cutting brick and paving stones
• Cutting natural stone such as granite and marble
• On-site dry cutting where water supply is limited

Key specifications

• Material: carbon steel body with diamond powder coating
• Manufacturing method: laser-welded construction
• Use mode: dry cutting
• Weight: 1.3 kg (affects handling and balance)
• Primary applications: cutting hard mineral materials (concrete, brick, stone)

How to use

Mount the accessory on a compatible angle grinder following the tool manufacturer's instructions for safe attachment and wheel guard alignment. Verify that the accessory is suitable for dry cutting and that the chosen rotation direction and mounting flange match the grinder specifications. When cutting, maintain steady, controlled feed rates and avoid excessive lateral pressure to maximise cutting efficiency and component life. Allow the accessory to cool periodically under heavy use to reduce risk of overheating.

Usage recommendations

Use appropriate personal protective equipment including eye and ear protection, dust mask or respirator, and protective gloves. Ensure the angle grinder's guard is properly fitted and that the workpiece is secured. For best results on reinforced concrete or very abrasive materials, use short, controlled cutting passes and inspect the accessory regularly for wear or damage.