Diamond Turbo Cutting Disc AWTools AW47230 230 x 22.2 mm

Diamond Turbo Cutting Disc AWTools AW47230 230 x 22.2 mm is a turbo-rim diamond blade designed for fast, efficient cutting of hard masonry materials. The segmented turbo profile promotes rapid chip removal while maintaining a controlled cut edge, making this disc suitable for stone, concrete, ceramic tiles and similar surfaces. It fits angle grinders with a 22.2 mm arbor and is intended for renovation, construction and masonry tasks where productivity and cut quality are required.

Advantages

The turbo rim construction of the AWTools disc delivers a balance between cutting speed and edge control, reducing heat build-up and clogging during prolonged use. Diamond grit bonded to the rim ensures consistent cutting performance and extended life on abrasive materials. The 230 mm diameter provides a wide cutting depth for thicker materials while remaining compatible with common 9" angle grinders that accept a 22.2 mm arbor.

Suitable for

• Cutting natural stone and granite
• Cutting concrete and reinforced concrete (non-demolition precision cuts)
• Cutting ceramic and porcelain tiles
• On-site renovation and installation work with angle grinders

Key specifications

• Disc diameter: 230 mm
• Arbor bore diameter: 22.2 mm
• Rim type: turbo diamond rim for enhanced chip removal
• Intended materials: stone, concrete, tiles and similar hard masonry
• Tool compatibility: standard angle grinders with 22.2 mm arbor

How to use

Mount the cutting disc on a properly rated angle grinder with a 22.2 mm arbor, ensuring the wheel is secured and rotates in the correct direction. Use steady, even pressure and allow the diamond rim to perform the cutting without forcing the tool. For best results, perform straight, continuous cuts and avoid excessive lateral pressure. Use appropriate guards and keep hands clear of the cutting path.

Usage recommendations

Always wear approved personal protective equipment including eye protection, hearing protection, dust mask and gloves. Use water cooling where applicable to reduce dust and extend blade life, but only if the disc and tool specifications permit wet cutting. Inspect the disc before each use for cracks or damage and replace if any defects are found. Follow the angle grinder manufacturer’s speed and mounting instructions; do not exceed the disc's maximum operating speed.