Circular saw blade AWTools AW48462 — diameter not specified, weight 420 g

AWTools AW48462 circular saw blade is a laser-cut carbon steel blade with tungsten-carbide teeth designed as a replacement consumable for compatible circular saws. The blade features expansion slots to dissipate heat and reduce deformation during prolonged cutting. Teeth are arranged with alternating bevels and a 10° positive hook angle; kerf width is approximately 4.5 mm. The blade is supplied with a 30 mm bore and includes 22 mm and 16 mm reduction rings; 115–125 mm variants use a 22 mm bore. Intended for transverse and angled cuts in hardwood, engineered wood and hard plastics, the blade is suitable for a wide range of general cutting applications when the correct diameter and tooth configuration are confirmed against the tool specifications.

Advantages

The AWTools AW48462 combines a laser-cut carbon steel body with tungsten-carbide teeth to extend service life and maintain cutting performance. Expansion slots help manage heat buildup and reduce the risk of blade warping under heavy use. The alternating bevel tooth geometry with a positive hook angle improves cut quality for crosscuts and angled cuts. Included reduction rings provide compatibility with different arbor sizes, facilitating use on both stationary and portable saws.

Suitable for

• Crosscutting hardwood and softwood
• Cutting wood-based panels such as plywood, MDF and chipboard
• Trimming and sizing hard plastics
• Use on portable circular saws and table saws with compatible arbor sizes

Key specifications

• Material: laser-cut carbon steel body
• Teeth: tungsten-carbide tipped with alternating bevels
• Hook angle: 10° positive
• Kerf width: approx. 4.5 mm
• Bore and adapters: 30 mm bore with 22 mm and 16 mm reduction rings (115–125 mm variants use 22 mm bore)
• Weight: 420 g

How to use

Before fitting, confirm the blade diameter and tooth configuration match your saw's specifications. Turn off and unplug the saw or remove the battery. Fit the appropriate reduction ring for your arbor and mount the blade following the saw manufacturer's instructions, ensuring the teeth point in the correct rotation direction. Tighten the arbor nut to the specified torque. During use, allow the blade to reach full speed before cutting and feed material at a steady, appropriate rate to avoid burning or excessive wear. After use, inspect the blade for damage or buildup and clean or replace as needed.

Usage recommendations

Use appropriate personal protective equipment (eye and hearing protection, dust mask) and secure the workpiece. For best results on hardwood and engineered panels, use steady feed rates and avoid forcing the blade. Replace the blade when chips or tooth damage reduce cut quality. Verify diameter and tooth count compatibility with your saw before purchase to ensure safe operation.