Circular saw blade AWTools AW484771 — weight 850 g

The AWTools AW484771 circular saw blade weighs 850 g and is designed as a replaceable cutting blade for compatible circular saws. Constructed from high-quality laser-cut carbon steel with tungsten-carbide teeth, the blade is intended for straight, transverse and beveled cutting work in woodworking and general construction. Expansion slots reduce heat buildup and help maintain blade flatness during heavy use. The blade is supplied as a single unit with a central bore and reduction rings to adapt to different arbor sizes.

Advantages

The laser-cut carbon steel body provides dimensional stability and consistent rotation, while tungsten-carbide tipped teeth retain sharpness for extended periods and deliver high cut quality. Expansion slots mitigate thermal deformation under high-speed or prolonged cutting, and the alternating bevel tooth geometry with a positive hook angle produces efficient chip removal and smooth crosscuts. Multiple reduction rings enable mounting on saws with differing arbor diameters, increasing compatibility across stationary and portable machines.

Suitable for

• Crosscutting hardwood and softwood
• Angle and bevel cuts in wood-based panels
• Cutting hard plastics and composite materials
• Use in stationary table saws, miter saws and portable circular saws with compatible arbor sizes

Key specifications

• Blade material: laser-cut carbon steel
• Tooth material: tungsten-carbide tips
• Tooth configuration: alternating bevels, positive hook angle (approx. 10°)
• Kerf width: approx. 4.5 mm
• Heat-dissipating expansion slots to reduce deformation
• Central bore with reduction rings for multiple arbor diameters
• Weight: 850 g

How to use

Install the blade on a compatible circular saw following the machine manufacturer's safety instructions: ensure power is disconnected, fit the correct reduction ring for your arbor, mount the blade with the teeth oriented in the direction of rotation, and secure the blade flange and nut to the specified torque. Adjust blade height and angle as needed for the intended cut. Before cutting, check the blade for any visible damage and perform a test cut on scrap material to confirm alignment and cut quality.

Usage recommendations

For best performance, use the blade at the recommended RPM range for its diameter, avoid prolonged heavy-load cutting without breaks to allow cooling, and keep the blade clean of resin and pitch buildup. Use appropriate personal protective equipment, a suitable fence or guide for straight cuts, and select blade speed and feed rate according to material type to prolong blade life and maintain cut quality.