Cutting Disc AWTools 125 mm for Angle Grinder, Thin – AWTools AW57007

AWTools 125 mm thin cutting disc for angle grinders (model AW57007) is engineered for precise, narrow-kerf cutting of metal and other hard materials. Designed to fit standard 125 mm angle grinders, the disc’s reduced thickness minimizes material loss and limits heat buildup during cutting operations, improving efficiency for construction, workshop and maintenance tasks.

Advantages

The thin profile of this AWTools cutting disc provides accurate cuts with a smaller kerf, which helps preserve material and reduce waste. Reduced thickness and optimized abrasive composition lower friction and heat generation, allowing cleaner edges and less distortion of the workpiece. The disc is compatible with common 125 mm grinders, making it a practical choice for both professional and DIY settings where narrow, controlled cuts are required.

Suitable for

• Cutting steel sheets, rods and profiles
• Trimming metal parts during fabrication and repair
• On-site maintenance and construction cutting tasks
• Workshop projects requiring precise, narrow cuts

Key specifications

• Diameter: 125 mm
• Type: Thin cutting disc for angle grinder
• Typical mounting bore: compatible with standard 125 mm grinders
• Material suitability: metal and other hard materials
• Design focus: narrow kerf and reduced heat generation

How to use

Mount the disc on a 125 mm angle grinder following the grinder manufacturer’s instructions and ensure the disc is suitable for the material to be cut. Secure the workpiece and use appropriate cutting speed and steady feed; avoid excessive pressure to prevent overheating and disc damage. Always let the disc reach full operating speed before contacting the workpiece and complete cuts in a smooth, continuous motion.

Usage recommendations

Wear appropriate personal protective equipment, including eye protection, gloves, hearing protection and a dust mask or respirator when cutting metal. Inspect the disc for damage before use, do not use if cracked or warped, and follow the maximum RPM rating on the disc and the grinder. Use the disc for cutting tasks only and replace it when wear affects cutting performance or safety.