Power chainsaw accessory AWTools AW80159, depth 400 mm, weight 1.4 kg

AWTools AW80159 is a guide bar and chain set designed as an accessory for compatible electric or petrol chainsaws. With a working depth of 400 mm and a net weight of 1.4 kg, this assembly provides a defined cutting depth and steadier handling for guided cuts such as pruning, trimming and repetitive slicing. The one-piece hardened steel guide bar has a powder-coated finish for abrasion and heat resistance, and the chain and components are engineered for accurate guidance and reduced friction.

Advantages

The guide bar is manufactured from a single piece of hardened steel and finished with a powder coat to resist wear and elevated temperatures. A replaceable sprocket nose secured with four high-tensile rivets and a roller bearing ensure precise guidance with minimal friction loss. The chain features semi-chisel cutters and riveted tie straps to reduce the risk of breaking or stretching during operation. An automatic chain lubrication system supports continuous operation and helps extend component life. The chrome-plated top plate on the cutters increases cutting speed while improving wear resistance.

Suitable for

• Controlled pruning and branch trimming
• Repetitive cutting tasks requiring consistent depth
• Guided cuts on small to medium-sized timber and logs
• Professional and DIY maintenance where stability and precision are needed

Key specifications

• Working depth: 400 mm
• Weight: 1.4 kg
• Guide bar: one-piece hardened steel, powder-coated finish
• Sprocket nose: replaceable, secured with four high-tensile rivets
• Bearing: roller bearing for reduced friction and precise guidance
• Chain: hardened steel with black oxide finish, semi-chisel cutters
• Cutters top plate: chrome-plated for increased cutting speed and wear resistance
• Lubrication: automatic chain lubrication system

How to use

Install the AWTools AW80159 set on a compatible chainsaw following the chainsaw manufacturer’s instructions for fitting guide bars and chains. Ensure the sprocket nose and roller bearing are correctly seated and the chain tension is adjusted to the recommended specification before operation. Fill the chainsaw’s lubrication reservoir and verify the automatic lubrication feeds oil to the chain. Operate the saw with the guide bar aligned to the intended cutting line, using steady, controlled feed and observing normal safety procedures including personal protective equipment and secure positioning.

Usage recommendations

Regularly inspect the sprocket nose, rivets and tie straps for wear and replace the sprocket nose or chain if excessive wear or damage is detected. Keep the automatic lubrication system filled and clean, and maintain correct chain tension to maximise cutting performance and component lifespan.