Tile Leveling System Base Clips 1 mm, 100 pcs – AWTools PRO-LEVELING

AWTools PRO-LEVELING base clips 1 mm, pack of 100, are plastic supports designed to create consistent grout joints and minimize lippage during tile installation. These base clips are part of the AWTools PRO-LEVELING system and are intended to be used together with compatible wedges or caps to hold adjacent tiles at the same height while adhesive sets. The 1 mm thickness provides a precise spacing suitable for narrow grout lines on ceramic and porcelain tiles for floors and walls.

Advantages

The clips provide stable temporary support that keeps tiles aligned and reduces the need for manual correction, improving installation speed and accuracy. Made from durable plastic, they resist deformation during installation and are easy to remove once the adhesive has cured. Their uniform thickness ensures consistent joint width and helps achieve a professional finish with reduced lippage between tiles.

Suitable for

• Installation of ceramic and porcelain floor tiles
• Wall tiling projects where narrow grout joints are required
• Professional and DIY tilers aiming for reduced lippage and even tile surfaces
• Situations requiring repeated, consistent spacing across large tiled areas

Key specifications

• Thickness: 1 mm spacer between tiles
• Quantity: 100 pieces per pack
• Material: impact-resistant plastic suitable for temporary use during adhesive curing
• Compatibility: designed for use with compatible leveling wedges or caps from the same system
• Suitable tile types: ceramic and porcelain for floors and walls

How to use

Place a base clip under the edges of adjacent tiles at the joint before the adhesive sets, ensuring the clip’s flat part sits on the substrate. Insert a compatible wedge or cap into the clip to apply light pressure that levels the tiles relative to each other. Allow the tile adhesive to cure according to the adhesive manufacturer’s instructions, then remove the wedges or caps and snap off the exposed part of the clips as designed for the system. After removal, clean the joints and proceed with grouting.

Usage recommendations

For best results, use the 1 mm base clips consistently across the area to maintain uniform grout width. Verify tile manufacturer limits for spacing and follow adhesive curing times before removing clips. Store unused clips in a dry place away from direct sunlight to preserve shape and performance.