Filament Azurefilm PETG FG171-2000, Lime, 1.75 mm, 1 kg spool

Azurefilm PETG FG171-2000 is a 1 kg spool of 1.75 mm PETG 3D printing filament in lime colour, designed for FDM printers that accept 1.75 mm filament. PETG (polyethylene terephthalate glycol-modified) combines good layer adhesion, chemical resistance and low warping, making it suitable for functional prototypes, mechanical parts and durable prints. The filament is vacuum-sealed with a desiccant packet to preserve dryness and spool geometry; the reel measures approximately 210 mm outer diameter, 60 mm inner bore and 62 mm width.

Advantages

Azurefilm PETG offers a balance of strength and flexibility with minimal shrinkage, resulting in reliable dimensional stability for medium and large prints. The material is odorless during printing, produces a glossy surface finish, and delivers strong interlayer bonding and good chemical resistance. It adheres well to common build surfaces such as glass, acrylic or adhesive tapes, and does not require an enclosed printer environment for typical prints.

Suitable for

• Functional prototypes and mechanical components
• Robotics parts and assemblies requiring strength and some flexibility
• Large-format prints where low warping is important
• Decorative items with a glossy finish
• Parts exposed to moderate chemical exposure or moisture

Key specifications

• Material: PETG (Polyethylene Terephthalate Glycol-modified)
• Colour: Lime
• Diameter: 1.75 mm
• Net weight: 1 kg
• Spool outer diameter: ~210 mm; inner bore: ~60 mm; spool width: ~62 mm
• Packaging: Vacuum-sealed spool with desiccant
• Surface finish: Glossy
• Compatibility: Standard 1.75 mm FDM printers (e.g., Creality Ender series)

How to use

Load the 1.75 mm filament into the extruder following your printer manufacturer's feeding instructions. Set the nozzle temperature in the recommended range and preheat the build plate as appropriate. Typical printing parameters for Azurefilm PETG are nozzle temperature 220–240°C and heated bed 80–90°C; actual values may require fine-tuning for your specific printer model, hotend and slicer profile. Use moderate print speeds and ensure good first-layer adhesion by levelling the bed and choosing a suitable build surface such as glass, acrylic or adhesive tape.

Usage recommendations

For best results, start with a nozzle temperature around 230°C and a bed temperature of 80–85°C, print the first layer slower to improve adhesion, and enable part cooling at low to moderate settings to balance bridge quality and layer bonding. Store the spool vacuum-sealed with desiccant when not in use to prevent moisture absorption.