3D Printing Filament Azurefilm FL171-5015 Blue 1.75 mm 1 kg

Azurefilm FL171-5015 Blue is a 1 kg spool of 1.75 mm silk-style 3D printing filament formulated for FDM consumer printers. The blue filament delivers a glossy, silky surface finish that reduces visible layer seams and is intended for general prototyping, household parts and hobbyist models. Supplied as a single pack (package weight about 1.35 kg), the filament is compatible with common desktop printers including Creality Ender series and other machines that accept 1.75 mm filament.

Advantages

The silk blend provides a shiny, smooth appearance that improves the visual quality of decorative prints and conceals layer transitions. The material prints similarly to PETG with moderate shrinkage behavior and good bed adhesion when recommended temperatures are used. Filament is vacuum-sealed with a desiccant to maintain dryness and consistent extrusion, and the 1 kg spool size supports medium-length print jobs without frequent spool changes.

Suitable for

• Decorative models and display pieces that benefit from a glossy finish
• Hobbyist figurines, cosplay parts and scale models
• Functional prototypes and household parts where aesthetic appearance matters
• General purpose printing for users of Creality Ender 3 and similar FDM printers

Key specifications

• Filament type: silk-style polymer blend (prints like PETG)
• Colour: blue
• Diameter: 1.75 mm
• Net weight: 1 kg
• Spool outer diameter: approx. 210 mm; inner hub diameter: approx. 60 mm; width: approx. 62 mm
• Packaging: vacuum-sealed spool with desiccant

How to use

Load the 1.75 mm spool into your printer following the manufacturer’s instructions. For best results, use a nozzle temperature in the 220–240°C range and a heated bed set around 60–80°C; exact settings may vary with different machines and models. Start with conservative print speeds and adjust extrusion multiplier and retraction to reduce stringing. Ensure the build surface is clean and level; glass, Kapton tape or blue painter’s tape are suitable build surfaces for this filament. Allow prints to cool gradually after printing to avoid surface defects.

Usage recommendations

For reliable output, preheat the nozzle and bed to the recommended temperatures, perform a small test print to fine-tune flow and retraction, and store unused filament in the sealed bag with desiccant to prevent moisture absorption. Monitor first-layer adhesion and adjust bed leveling as needed for consistent glossy results.