Cable tray Baks KGR/KPR100H42/2 galvanized 100×2000 mm (model 141517)

Baks KGR/KPR100H42/2 galvanized cable tray 100×2000 mm (model 141517) is a metal routing and support element for electrical installations. Constructed from Sendzimir-zinc-coated steel, it provides a straight channel with a useful cross-section of 4000 mm², 100 mm width and 42 mm side height, suitable for arranging and protecting cables along walls, ceilings or within cable routes in commercial and industrial buildings. The tray length is 2000 mm and sheet thickness is 0.5 mm; trays can be joined by sliding one into another to form continuous runs and fixed with recommended mounting screws.

Advantages

The galvanized finish ensures corrosion resistance and long service life in indoor and covered outdoor environments. The rigid steel construction gives mechanical protection to enclosed cables while maintaining a low profile for compact installations. Standardized dimensions and the ability to connect sections without separate connectors simplify planning and installation, and the tray’s geometry allows tidy cable laying and straightforward support to other tray accessories.

Suitable for

• Routing and supporting power, control and communication cables in commercial buildings
• Industrial cable management in production facilities and utility rooms
• Installing continuous cable runs along walls, ceilings or service routes
• Projects requiring corrosion-resistant, metal cable support systems

Key specifications

• Material: Sendzimir-zinc-coated steel (galvanized)
• Overall width: 100 mm
• Useful cross-section: 4000 mm²
• Side height: 42 mm
• Length of tray section: 2000 mm
• Sheet thickness: 0.5 mm

How to use

Position the tray sections along the planned cable route and join adjacent sections by sliding one into the next to create a continuous run. Secure the joined sections and mount the tray to the supporting structure using appropriate fasteners; recommended screws are SGKM6x10 or SGM6x10. Lay cables inside the tray maintaining proper separation between power and signal lines as required by project standards, and use appropriate fixing accessories (clamps, dividers, covers) where necessary. Cut or terminate sections only with suitable tools and protect cut edges from sharp burrs.

Usage recommendations

For safe and code-compliant installations, verify load capacity and mounting intervals against local regulations and the total cable fill. Minimum order quantity corresponds to the sold length increments; the product is priced per meter and must be ordered in multiples of the section length or the supplier’s minimum quantity. Use corrosion-appropriate fasteners and grounding methods when installing in environments with increased moisture or chemical exposure.