Mounting Angle Baks CMP41H41/1,5MC 856215 – steel profile, 41×41 mm, 1.5 m

Baks CMP41H41/1,5MC is a steel mounting angle profile with a square cross-section of 41×41 mm and a length of 1.5 m. Designed for structural and installation work, this rigid right-angle profile is intended for frame assemblies, supports, brackets and reinforcement tasks where a durable steel connection is required. The profile can be joined by mechanical fastening, welding or bolting to form stable joints in building and equipment installations.

Advantages

The steel profile offers consistent dimensional accuracy and mechanical strength appropriate for load-bearing and support applications. Its 41×41 mm cross-section provides a compact but sturdy section that is easy to cut, drill and weld. The 1.5 m length balances transportability with usability on-site, reducing the need for additional joins while keeping handling simple.

Suitable for

• Frame assemblies and metal structures
• Support brackets and shelving frames
• Reinforcement and corner connections
• Equipment mounts and industrial fittings
• Construction and repair of small steel frameworks

Key specifications

• Material: steel
• Cross-section (width × height): 41 × 41 mm
• Length: 1.5 m
• Shape: right-angle profile (L-shaped)
• Joining methods: suitable for bolting, welding and mechanical fastening

How to use

Measure and mark the required cut and drill points on the profile before installation. Cut and drill with suitable metalworking tools, then position the angle to form the intended right-angle connection. Fasten using bolts and nuts through predrilled holes or weld along the mating surfaces where permitted. Ensure contact surfaces are clean and, if welding, follow appropriate safety procedures and welding parameters for steel. For load-bearing connections, use appropriate fastener grades and torque values as specified by the project design.

Usage recommendations

Store the profiles in a dry, covered area to avoid corrosion. For outdoor or corrosive environments, consider applying a protective coating or using corrosion-resistant fasteners. When cutting or welding, use personal protective equipment and follow local safety regulations. Verify compatibility of fastening methods with the connected materials and consult structural requirements when using the profile in load-bearing assemblies.