Filament BambuLab Refill PLA Basic 1.75 mm 1 kg - Red

BambuLab Refill PLA Basic 1.75 mm 1 kg - Red is a standard polylactic acid (PLA) filament designed for FDM/FFF 3D printers that accept 1.75 mm filament. The spool contains 1 kg of red PLA suitable for general-purpose prototyping, hobbyist models and functional parts where straightforward printing, good dimensional stability and minimal warping are important. This filament is intended for users who need an easy-to-print material with predictable behavior across a wide range of printers and print settings.

Advantages

This PLA filament offers reliable layer adhesion, consistent diameter tolerance and low odor during printing. Its 1.75 mm diameter and standard spool weight make it compatible with most desktop 3D printers. The material provides good surface finish and is less prone to warping than many engineering plastics, which simplifies bed adhesion and reduces the need for specialized enclosures or heated chambers.

Suitable for

• Prototyping and concept models
• Hobbyist prints and decorative objects
• Educational projects and classroom use
• Functional parts with moderate mechanical requirements
• Multi-color or batch printing where color consistency matters

Key specifications

• Material: Polylactic acid (PLA)
• Filament diameter: 1.75 mm
• Net weight: 1 kg
• Colour: Red
• Compatibility: FDM/FFF 3D printers accepting 1.75 mm PLA filament

How to use

Load the spool onto your printer’s filament holder and feed the filament through the extruder according to the printer manufacturer’s instructions. Recommended print temperature ranges typically fall between 190–220 °C, with a heated bed temperature around 20–60 °C if available; adjust settings based on your printer and desired print quality. Use a standard print speed for PLA and enable retraction settings to reduce stringing. Ensure the build plate is clean and level before starting a print to improve first-layer adhesion and dimensional accuracy.

Usage recommendations

Store the filament in a dry environment away from direct sunlight and high humidity to preserve mechanical properties and printing performance. For better adhesion on the first layer, consider a thin adhesive aid such as a glue stick or blue painter’s tape on the build plate, and calibrate extrusion multiplier if necessary to achieve accurate dimensional results.