Filament BambuLab ABS 1.75 mm 1 kg with reusable spool — White

BambuLab ABS 1.75 mm 1 kg with reusable spool — White is a general-purpose ABS filament designed for 3D printing applications where impact resistance and elevated temperature tolerance are required. The filament comes on a reusable spool and has a nominal diameter of 1.75 mm, making it suitable for a wide range of FDM/FFF printers that accept ABS material in this diameter. The white color provides a neutral surface for post-processing such as painting, sanding and vapor smoothing.

Advantages

ABS offers good mechanical strength, toughness and dimensional stability compared with many consumer-grade filaments. The supplied reusable spool simplifies storage and handling while reducing waste. The consistent diameter and melt behavior of this filament support reliable extrusion and layer adhesion when printing with correct temperature and enclosure settings.

Suitable for

• Functional prototypes and mechanical components requiring impact resistance
• Enclosures, housings and brackets exposed to moderate heat
• Wearable jigs and fixtures for workshop use
• Household items and tools that need higher strength than PLA

Key specifications

• Material: Acrylonitrile Butadiene Styrene (ABS)
• Nominal diameter: 1.75 mm
• Spool weight: 1 kg filament
• Color: White
• Packaging: Reusable filament spool

How to use

Load the filament onto a printer compatible with 1.75 mm ABS and secure the reusable spool on the spool holder. Set nozzle and bed temperatures according to your printer and ABS best practices — typical nozzle temperatures are higher than for PLA, and an enclosed build chamber or heated bed helps reduce warping. Purge the nozzle until extrusion is steady, then print using recommended layer heights and print speeds for ABS. After printing, allow parts to cool gradually to reduce internal stresses.

Usage recommendations

For best results, print with a heated bed and, if available, an enclosed build chamber to minimize warping and layer separation. Use appropriate ventilation when printing ABS and perform post-processing such as sanding or acetone vapor smoothing in a well-ventilated area. Store the filament on the reusable spool in a dry environment or sealed container with desiccant to preserve print quality.