Filament BambuLab ABS-GF 1.75 mm 1 kg Blue — BambuLab ABS-GF 1,75mm 1kg

BambuLab ABS-GF is a 1.75 mm, 1 kg spool of glass-fiber reinforced ABS filament in blue, formulated for FDM/FFF 3D printers. Reinforced ABS-GF combines the familiar processing characteristics of ABS with added stiffness, improved dimensional stability and higher heat resistance provided by glass-fiber reinforcement. The material is intended for functional prototypes, mechanical parts and housings where increased rigidity and resistance to deformation are required.

Advantages

Glass-fiber reinforcement increases tensile stiffness and reduces creep compared with standard ABS while retaining good layer adhesion and machinability. The filament offers improved dimensional stability at elevated temperatures, making it suitable for parts exposed to heat or mechanical load. The 1.75 mm diameter and consistent spool tension support steady extrusion and reliable print results when printer settings are adapted for reinforced filaments.

Suitable for

• Functional prototypes and end-use mechanical components
• Enclosures and housings requiring improved heat resistance
• Structural parts, brackets and fixtures with higher stiffness demands
• Applications where reduced long-term deformation (creep) is important

Key specifications

• Filament type: ABS with glass-fiber reinforcement
• Diameter: 1.75 mm
• Spool weight: 1 kg
• Colour: Blue
• Compatibility: FDM/FFF 3D printers designed for reinforced or abrasive filaments (use hardened nozzles)
• Mechanical characteristics: increased stiffness and improved dimensional stability versus standard ABS

How to use

Load the filament on a 3D printer capable of handling glass-fiber‑reinforced materials. Use a hardened steel or other abrasion-resistant nozzle to avoid accelerated wear. Set extrusion temperature and bed temperature according to the printer manufacturer’s guidance for ABS-based reinforced filaments; typically higher printing temperatures than standard ABS are used to ensure good flow and interlayer bonding. Control cooling to balance layer adhesion and surface finish, and consider using an enclosed build chamber to reduce warping. Calibrate extrusion multiplier and retraction settings to accommodate the composite filament’s flow characteristics.

Usage recommendations

For best results, print with a hardened nozzle, use an enclosed printer or chamber for thermal stability, and store filament in a dry environment to prevent moisture uptake. Post-processing such as sanding or machining is possible but may require appropriate dust control when working with glass fibers.