Filament BambuLab ABS-GF 1.75 mm 1 kg — BambuLab, red

BambuLab ABS-GF 1.75 mm is a glass-fiber reinforced ABS filament supplied on a 1 kg spool for FDM/FFF 3D printers. The material blends standard ABS thermoplastic with short glass fibers to increase tensile strength, stiffness and dimensional stability while retaining the processing characteristics of ABS. This filament is formulated for functional parts, prototypes and end-use components that demand improved mechanical performance and higher heat resistance compared with unfilled ABS.

Advantages

Glass-fiber reinforcement enhances rigidity and reduces warping, providing more reliable dimensional accuracy for larger or load-bearing prints. The reinforced ABS offers improved impact resistance and higher heat deflection temperature compared with standard ABS, making it suitable for parts exposed to mechanical stress and elevated temperatures. The 1.75 mm diameter is compatible with a wide range of desktop FDM/FFF printers and the 1 kg spool supports extended printing runs.

Suitable for

• Functional prototypes requiring increased stiffness and dimensional stability
• End-use components and housings subject to mechanical load and heat
• Structural parts, brackets and fixtures
• Engineering applications where improved strength-to-weight ratio is needed

Key specifications

• Material: ABS with glass fiber reinforcement
• Filament diameter: 1.75 mm
• Spool mass: 1 kg net filament
• Color: red
• Form: filament for FDM/FFF 3D printing
• Mechanical properties: increased stiffness and tensile strength compared with unfilled ABS
• Thermal performance: higher heat deflection temperature than standard ABS

How to use

Load the filament into a compatible 1.75 mm FDM/FFF 3D printer and set printing parameters appropriate for ABS-based materials. Use a heated build platform and an enclosure if available to reduce warping and improve layer adhesion. Recommended nozzle diameter and temperatures depend on printer and nozzle material; select a hardened nozzle when printing with glass-fiber reinforced filament to avoid accelerated nozzle wear. Calibrate extrusion multiplier and retraction settings for consistent flow and to minimise stringing.

Usage recommendations

Dry the filament before printing if it has been stored in humid conditions, and store spools in a dry environment or sealed bag with desiccant. Use print speeds and cooling settings suited for ABS composites, and consider post-processing treatments such as annealing to further stabilise dimensional properties when required.