Filament BambuLab PLA Matte 1.75 mm 1 kg — Marine Blue

BambuLab PLA Matte 1.75 mm 1 kg — Marine Blue is a polylactic acid (PLA) filament formulated to produce a subdued, non-glossy surface finish. The filament is supplied on a 1 kg spool with a 1.75 mm diameter designed for FDM/FFF 3D printers. It delivers consistent extrusion and dimensional stability suitable for prototyping, decorative parts and functional prints where low warping and a matte appearance are required.

Advantages

This PLA Matte filament offers reliable feeding and steady layer adhesion under standard PLA print settings, helping to reduce print failures. The matte Marine Blue finish minimizes visible layer reflections and fingerprints, improving the look of display models and aesthetic parts without the need for post-processing. Its low warping characteristics make it appropriate for medium-sized prints on printers with or without an enclosed build chamber.

Suitable for

• Prototyping and concept models
• Decorative objects and display pieces
• Functional parts with low mechanical stress
• Hobbyist projects and educational use

Key specifications

• Material: Polylactic acid (PLA)
• Diameter: 1.75 mm
• Spool weight: 1 kg
• Finish: Matte
• Colour: Marine Blue
• Compatibility: Standard FDM/FFF 3D printers supporting 1.75 mm filament

How to use

Load the filament onto the spool holder ensuring smooth, tangle-free unwinding. Set your printer to standard PLA temperatures (typical nozzle range 190–220 °C; bed temperature 0–60 °C depending on printer and adhesion method). Calibrate extrusion multiplier and retraction settings for your specific hotend to avoid stringing while preserving the matte surface. Print at moderate speeds to maintain consistent layer lines and dimensional accuracy. Allow parts to cool sufficiently before removal to minimise deformation.

Usage recommendations

Store the filament in a dry, cool place and use desiccant when storing opened spools to prevent moisture uptake. For best surface quality, use a clean nozzle and calibrated extrusion steps. If additional adhesion is required, apply standard build-surface aids such as PEI sheets, blue painter's tape or a thin glue stick layer on the build plate.