Filament BambuLab Refill PLA Matte 1.75mm 1kg – Grass Green

BambuLab Refill PLA Matte 1.75mm 1kg – Grass Green is a general-purpose PLA filament formulated for FDM/FFF 3D printers. The 1.75 mm diameter spool provides consistent extrusion for prototypes, household parts and decorative models where a subdued, non-gloss finish is preferred. This matte PLA balances dimensional stability and reliable layer adhesion, making it suitable for everyday printing tasks that require a neat surface texture and straightforward print settings.

Advantages

The matte surface reduces visible reflections and highlights fine surface detail without post-processing gloss. Its 1.75 mm diameter is manufactured to tight tolerances to minimize clogs and ensure consistent flow through common hotends. The PLA chemistry offers low-warp behaviour and good adhesion between layers at typical printing temperatures for PLA, enabling predictable results for both single-part prints and small assemblies. The Grass Green colour provides a uniform, opaque appearance suitable for visual prototypes and finished decorative items.

Suitable for

• Functional prototypes and concept models
• Household parts, clips and holders
• Decorative models, figurines and display pieces
• Educational projects and classroom printing

Key specifications

• Material: Polylactic Acid (PLA)
• Diameter: 1.75 mm
• Net weight: 1 kg spool
• Finish: Matte
• Colour: Grass Green
• Compatibility: FDM/FFF 3D printers

How to use

Load the 1.75 mm filament onto a compatible FDM/FFF printer following the manufacturer's filament loading procedure. Use standard PLA printing temperatures, typically between 190–220 °C, and a heated bed set to 20–60 °C or unheated depending on adhesion method. Print at moderate speeds and enable retraction settings to reduce stringing; adjust layer height and print speed according to nozzle diameter and desired surface quality. Allow printed parts to cool fully before removal to maintain dimensional accuracy and prevent deformation.

Usage recommendations

Store the filament in a dry environment or sealed container with desiccant to avoid moisture absorption. For improved first-layer adhesion use a clean build surface, glue stick, PEI sheet or blue painter’s tape as appropriate. When printing detailed or small features, reduce print speed and lower retraction distance if stringing occurs. Avoid exposure to direct sunlight for prolonged periods to preserve colour and mechanical properties.