Filament BambuLab Refill PLA Basic 1.75 mm 1 kg – Maroon Red

BambuLab Refill PLA Basic 1.75 mm 1 kg – Maroon Red is a standard PLA filament spool intended for FDM/FFF 3D printers that accept 1.75 mm filament. The material offers the common properties of polylactic acid: easy extrusion, low tendency to warp, and good surface finish for visual parts. This 1 kg spool in maroon red is suitable for general-purpose prototyping, hobby models and household items where a single solid color and reliable printability are required.

Advantages

The filament prints at typical PLA temperature ranges, enabling straightforward setup on most consumer and prosumer 3D printers. Its formulation focuses on dimensional stability and consistent diameter to reduce print failures and stringing when basic print profiles are used. The maroon red color delivers a uniform appearance for single-color parts, making it convenient for visible prototypes and decorative objects without post-processing color work.

Suitable for

• Visual prototypes and display models
• Hobbyist miniatures, figurines and scale models
• Household items such as holders, hooks and organizers
• Educational and classroom printing projects

Key specifications

• Filament material: polylactic acid (PLA)
• Diameter: 1.75 mm
• Spool weight: 1 kg (net filament weight)
• Color: maroon red
• Compatibility: FDM/FFF 3D printers accepting 1.75 mm filament
• Typical printing characteristics: low warping, good surface finish

How to use

Load the filament onto the printer spool holder and feed it into the extruder according to your printer’s instructions. Use a nozzle temperature typical for PLA (consult your printer or slicer for a recommended range) and a moderate bed temperature or use an unheated bed with adhesion aids if required. Calibrate extrusion multiplier and retraction settings in your slicer to suit the maroon red PLA and the specific geometry of your prints. Store the spool in a dry environment after use to maintain print quality.

Usage recommendations

For best results, print with layer heights and speeds matched to your nozzle size and printer capability. If increased part strength is needed, increase infill and wall counts rather than raising print temperature. Keep the filament dry by storing it in a sealed bag with desiccant and avoid prolonged exposure to direct sunlight to preserve color and printability.