Filament BambuLab PLA Wood 1.75 mm 1 kg Ochre Yellow — BambuLab

BambuLab PLA Wood 1.75 mm 1 kg Ochre Yellow is a PLA-based composite filament engineered to reproduce the look and surface feel of natural wood for FDM/FFF 3D printing. Supplied on a 1 kg spool with a 1.75 mm diameter, this filament is formulated to deliver wood-like grain, subtle color variation and a matte finish while retaining the printability and dimensional stability of standard PLA. It is suitable for decorative parts, scale models and prototypes where a wood appearance is desired without post-processing with real wood materials.

Advantages

This filament combines the ease of printing typical for PLA with additives that create a wood-like texture and appearance. It prints on common desktop FDM/FFF machines using standard PLA temperature settings and provides good layer adhesion and minimal warping. The ochre yellow coloration gives finished prints a warm, natural tone and the material accepts light sanding and finishing to enhance grain effect. No specialised heated chamber is required; a nozzle compatible with composite filaments is recommended to reduce wear.

Suitable for (tasks / use cases)

• Decorative items and home accessories with a wood-like look
• Architectural and scale models requiring natural surface texture
• Prototypes where aesthetic wood appearance is important
• Figurines, props and hobby prints with matte, grainy finish

Key specifications

• Material base: PLA composite with wood-like fillers
• Filament diameter: 1.75 mm
• Spool weight: 1 kg
• Colour: ochre yellow (wood-like tone)
• Finish: matte with visible grain effect after printing

How to use

Load the 1.75 mm filament into a compatible FDM/FFF printer and use standard PLA print settings as a starting point. Recommended nozzle temperature typically falls within the common PLA range; adjust temperature and print speed to optimise surface texture and layer adhesion for your specific printer. Use a nozzle that is rated for composite or wood-fill filaments to minimise wear. Small test prints are advised to dial in retraction, cooling and print speed settings before producing larger parts.

Usage recommendations

For best results, print on a flat, clean build surface and enable part cooling to enhance detail. Light sanding and applied finishes (such as wax or matte varnish) can emphasise the wood grain and protect the surface. Store the filament in a dry environment or sealed container with desiccant to preserve print quality.