Filament BambuLab PLA Wood 1.75 mm 1 kg — Clay Brown by BambuLab

BambuLab PLA Wood 1.75 mm — Clay Brown is a PLA-based composite filament formulated to deliver a wood-like appearance and texture for FDM/FFF 3D printing. Supplied on a 1 kg spool with 1.75 mm diameter, this filament is intended for desktop and prosumer printers compatible with 1.75 mm filament. It combines the ease of printing typical for PLA with additives that alter surface finish and color to resemble natural wood tones, producing decorative prototypes, scale models, figurines and other objects where a wood finish is desired.

Advantages

The filament prints at standard PLA temperatures and offers good layer adhesion and dimensional stability for typical desktop printers. Its composite formulation gives printed parts a matt, slightly textured surface that simulates wood grain without post-processing. The Clay Brown color provides a warm, natural tone suitable for decorative pieces and models. The 1 kg spool format reduces the need for frequent filament changes during medium-size projects.

Suitable for

• Decorative prototypes and display models
• Architectural and scale models
• Miniatures and figurines with a wood-like finish
• Home décor items and small furniture accents
• Educational projects and rapid prototyping with aesthetic requirements

Key specifications

• Material base: PLA composite with wood-like additives
• Diameter: 1.75 mm
• Spool weight: 1 kg
• Colour: Clay Brown (natural, warm brown tone)
• Intended printing technology: FDM/FFF
• Recommended printer compatibility: desktop and prosumer printers accepting 1.75 mm filament
• Surface finish: matte, slightly textured to simulate wood grain

How to use

Load the filament onto a 1.75 mm-compatible extruder and set printing temperatures within the typical PLA range for your printer and nozzle size. Start with manufacturer-recommended PLA temperature settings and adjust by ±5–10 °C if needed to optimise flow and surface finish. Print at moderate speeds to preserve the wood-like texture and ensure good layer bonding. Use a heated bed if available to reduce warping; if not, apply adhesive or build-surface preparation suitable for PLA materials. Allow parts to cool gradually before removal to maintain dimensional accuracy.

Usage recommendations

For best visual results, use a nozzle of 0.4 mm or larger, print at moderate speed, and consider single-wall or low-infill prints for visible surfaces. Light sanding and a clear matte varnish can enhance the wood effect while preserving texture. Avoid excessive retraction and very high temperatures to reduce the risk of clogging or degraded surface appearance.