Filament BambuLab ABS 1.75 mm 1 kg with reusable spool — Tangerine Yellow

BambuLab ABS 1.75 mm filament in Tangerine Yellow is a 1 kg spool of engineering-grade ABS formulated for FDM/FFF 3D printing. Supplied on a reusable spool, this filament is intended for printers that accept 1.75 mm ABS material and is designed to produce rigid, heat-resistant parts suitable for functional prototypes, housings and mechanical components. The filament's color and consistent diameter support precise layer adhesion and dimensional stability when printed under the recommended conditions.

Advantages

This ABS filament offers good mechanical strength and elevated thermal resistance compared with standard PLA, making it suitable for parts that must withstand higher temperatures and mechanical stress. The reusable spool reduces waste and simplifies storage and handling. Consistent diameter and quality control reduce print failures and help achieve repeatable results across multiple prints.

Suitable for

• Functional prototypes and concept models that require strength and durability
• Electronic enclosures and housings exposed to moderate heat
• Mechanical parts, brackets and fixtures
• Post-processed parts that will be sanded, painted or acetone-smoothed

Key specifications

• Filament material: ABS (Acrylonitrile Butadiene Styrene)
• Diameter: 1.75 mm nominal
• Net weight: 1 kg of filament per spool
• Color: Tangerine Yellow
• Spool type: reusable spool for easy mounting and storage
• Form: solid round filament suitable for FDM/FFF printers

How to use

Load the 1.75 mm ABS filament onto the printer compatible with ABS material and ensure the reusable spool is correctly mounted. Print with a heated nozzle and heated bed; typical nozzle temperatures for ABS range between 230–260 °C and a bed temperature between 80–110 °C, but settings should be adjusted according to your printer, model geometry and ambient conditions. For best dimensional accuracy and reduced warping, use an enclosure or controlled build chamber and apply a suitable bed surface treatment or adhesive to improve first-layer adhesion. Allow printed parts to cool gradually inside the enclosure to reduce internal stresses.

Usage recommendations

Store filament in a dry, dust-free environment and keep the spool sealed with desiccant when not in use to maintain print quality. When transitioning from other materials, purge the hotend to avoid contamination. Test print calibration cubes and adjust retraction and cooling settings to balance layer adhesion with surface finish.