Filament BambuLab PETG Translucent 1.75 mm 1 kg — Translucent Pink

BambuLab PETG Translucent 1.75 mm 1 kg — Translucent Pink is a transparent-tinted PETG filament formulated for FDM/FFF 3D printing. The spool contains 1 kg of 1.75 mm diameter filament in a translucent pink shade that preserves light transmission while adding color. This filament is intended for printers that accept standard PETG settings and is designed to balance mechanical strength, chemical resistance and ease of printing with reduced warping compared to amorphous thermoplastics like ABS.

Advantages

This PETG filament provides reliable layer adhesion, good impact resistance and dimensional stability for medium-duty functional parts. The translucent pink material allows partial light diffusion and visual inspection of internal features while maintaining structural integrity. It prints with minimal warping and low odor, and it is compatible with common PETG temperature ranges and print speeds used on desktop FDM/FFF systems.

Suitable for

• Functional prototypes and mechanical components requiring toughness
• Enclosures and housings where translucency aids visibility
• Decorative items and lighting diffusers that benefit from colored translucence
• Parts exposed to mild chemicals or moisture where PETG’s resistance is preferred

Key specifications

• Material: PETG (translucent, colored)
• Diameter: 1.75 mm
• Net weight: 1 kg spool
• Color: Translucent pink (light-transmitting)
• Compatibility: FDM/FFF 3D printers supporting 1.75 mm filament
• Print behavior: Low warpage, good layer bonding, moderate flexibility

How to use

Load the filament onto a 1.75 mm compatible extruder and set printer parameters for PETG: recommended nozzle temperature typically in the PETG range and a heated bed to improve adhesion. Use moderate print speed, calibrated extrusion multiplier and retraction settings to reduce stringing. Allow cooling per layer as appropriate for model geometry to balance bridging and layer adhesion. Store the spool in a dry place or sealed container with desiccant when not in use.

Usage recommendations

Start with printer settings recommended for PETG on your machine, adjust nozzle temperature and print speed for optimal surface finish, and perform small test prints to dial in retraction and cooling. For best translucency, use wider extrusion widths and thinner outer walls; for greater mechanical strength, increase infill and wall count. Keep filament dry to maintain consistent print quality.