IP camera BCS AD2M3V-G 2MP with 3.6mm lens

BCS AD2M3V-G is a 2MP IP camera with a 3.6mm fixed lens designed for video surveillance in residential and commercial environments. The camera captures Full HD (1920x1080) video suitable for monitoring entrances, rooms and outdoor areas when installed with appropriate housings. It supports continuous recording to network video recorders (NVR) or network storage and enables remote live view and playback via compatible BCS software and mobile apps. The compact design and fixed 3.6mm optics deliver a balanced field of view for general-purpose monitoring where face and object recognition at short to medium range are required.

Advantages

The camera provides Full HD resolution with efficient compression to reduce network load and storage requirements. A 3.6mm fixed lens offers a practical viewing angle for corridors, small parking areas and storefronts without the need for frequent adjustments. Network connectivity and compatibility with common NVR systems allow centralized recording and remote management. The device is suitable for continuous operation and integrates with typical surveillance setups.

Suitable for

• Indoor monitoring of offices, retail spaces and private residences
• Perimeter and entryway surveillance in small commercial sites
• Continuous recording to NVR or network-attached storage
• Remote monitoring via compatible software and mobile applications

Key specifications

• Image sensor resolution: 2 megapixels (Full HD 1920×1080)
• Lens type and focal length: fixed 3.6 mm
• Video output: IP network stream (compatible with ONVIF-capable systems)
• Compression: H.264/H.265 or manufacturer-supported codecs for reduced bandwidth
• Power options: PoE (if supported) or DC power depending on installation
• Mounting: wall or ceiling mountable with compact form factor
• Operating environment: suitable for indoor use or outdoor when installed in appropriate housing

How to use

Install the camera at the desired location and secure it using the appropriate mount. Connect the camera to the network via Ethernet; if Power over Ethernet (PoE) is available, a single PoE connection can provide both data and power. Configure the device using the supplied BCS setup tools or a compatible NVR interface: assign an IP address, set recording schedules and enable motion detection if required. Adjust the camera angle so the 3.6mm lens covers the target area at short to medium range, then verify live view and recording from the management software or mobile application.

Usage recommendations

For reliable outdoor use, install the camera inside a weatherproof housing and position it under cover to reduce direct exposure to precipitation and sunlight. Use network settings that prioritize bandwidth management and regular firmware updates to maintain security and compatibility with NVR systems.