SDS+ Point Bit Beast 9025925 — 10 mm diameter

SDS+ Point Bit Beast 9025925 with a 10 mm diameter tip is a chisel-style bit with an SDS+ shank designed for use in rotary hammers and tools with an SDS chuck. It is intended for breaking, piercing and precise starting of holes in masonry, brick and concrete where a concentrated impact point is required. The bit has a 14 mm shank diameter and a total length of 250 mm, compatible with SDS+ systems and suitable for both professional and DIY applications.

Advantages

The point-shaped carbide tip focuses impact energy to enable accurate hole starting and controlled puncturing of walls, concrete structures and brickwork. The SDS+ shank ensures secure, easy mounting and efficient energy transfer from the rotary hammer. A 250 mm length provides extended reach for deeper penetration and working in confined or recessed areas. The bit is compatible with hammer-drill chiselling functions and standard SDS+ chucks.

Suitable for

• Breaking out plaster, tiles and render
• Piercing and starting holes in masonry and brick
• Perforating concrete surfaces and structural elements
• Demolition and chipping tasks requiring a concentrated impact point

Key specifications

• Brand: Beast
• Model (MPN): 9025925
• Tip diameter: 10 mm
• Shank diameter: 14 mm
• Shank type: SDS+
• Total length: 250 mm
• EAN: 4750959025925

How to use

Insert the SDS+ shank into the compatible rotary hammer or hammer drill according to the tool manufacturer's instructions until it locks. Select the hammering or chiselling mode on the tool and position the point bit against the intended spot. Apply steady pressure and allow the tool's impact action to drive the point through masonry, brick or concrete. For precision work, start at low feed pressure and increase as needed. Withdraw periodically to clear debris and prevent excessive heating.

Usage recommendations

Use appropriate personal protective equipment including safety glasses, hearing protection and dust mask. Ensure the rotary hammer is switched off and unplugged (or battery removed) before fitting or removing the bit. Match the bit to the correct tool mode and avoid side loading to extend bit life.