Motion sensor BEMKO 1361276 — 180° detection, IP44, 1200W, black

BEMKO 1361276 is a ceiling or wall-mounted motion sensor with a 180° detection angle and IP44 protection class for splash resistance. It has a switching capacity of 1200 W and operates on ~230 V / 50 Hz. The sensor is intended to control lighting and electrical loads automatically by detecting movement in indoor and sheltered outdoor locations such as hallways, garages and entrances.

Advantages

The device offers wide-area detection up to 12 m with adjustable sensitivity (3–2000 lx) and configurable on-time from 5 seconds to 13 minutes. It features low standby power consumption (Psb < 0.5 W), an operating temperature range from −20 °C to +40 °C, and a compact form factor (73 × 86 × 95 mm) suitable for ceiling or wall installation. IP44 rating ensures basic protection against water splashes for sheltered outdoor use.

Suitable for

• Hallways and corridors
• Garages and carports
• Building entrances and stairwells
• Sheltered outdoor areas (porches, covered walkways)

Key specifications

• Detection angle: 180°
• Detection range: up to 12 m
• Switching capacity: 1200 W
• Supply voltage: ~230 V / 50 Hz
• Protection class: IP44
• Standby power: Psb < 0.5 W
• On-time: 5 s to 13 min
• Reaction time: 10 s to 7 min
• Sensitivity (light level): 3–2000 lx
• Operating temperature: −20 °C to +40 °C
• Dimensions (W × D × H): 73 × 86 × 95 mm
• Color: black

How to use

Install the BEMKO 1361276 on a ceiling or wall following local electrical regulations and ensure the supply is ~230 V / 50 Hz. Mount the sensor at an appropriate height and orientation to cover the required area within its 180° detection field and up to 12 m range. After wiring, set the on-time and sensitivity according to ambient light and desired behaviour; verify operation by walking through the detection zone.

Usage recommendations

For reliable performance, avoid mounting the sensor near heat sources, air vents or behind large obstacles that can block the detection field. Use the sensitivity and on-time adjustments to minimise false triggers from pets or transient light changes. Ensure the installation location is sheltered if exposed to direct weather despite the IP44 rating.