Motion Sensor BEMKO 1361283 180° IP44 1300W black

Motion Sensor BEMKO 1361283 offers 180° detection and IP44 protection for controlling lighting and electrical loads up to 1300 W. Designed for switching lights and other loads automatically when motion is detected, it is suitable for indoor areas and sheltered outdoor locations that need basic splash protection. The sensor supports a detection range of up to 12 m and operates on ~230 V / 50 Hz, with adjustable sensitivity and timing settings to match different installation needs.

Advantages

The sensor provides a wide 180° coverage and a maximum detection distance of 12 m, combined with IP44 protection for reliable operation in sheltered outdoor and indoor environments. It supports a maximum load of 1300 W and has low standby power consumption (Psb < 0.5 W). Adjustable settings include sensitivity (3–2000 lx), switch-on time (5 seconds to 13 minutes) and reaction time (10 seconds to 7 minutes), allowing flexible configuration for different applications.

Suitable for

• Corridors and hallways
• Entrances and porches with basic splash protection
• Garages and utility rooms
• Stairwells and common areas in residential buildings

Key specifications

• Model: BEMKO 1361283
• Detection angle: 180°
• Detection range: up to 12 m
• Maximum load: 1300 W
• Supply voltage: ~230 V / 50 Hz
• Protection class: IP44
• Standby power: Psb < 0.5 W
• Sensitivity: 3–2000 lx
• Switch-on time: 5 s to 13 min
• Reaction time: 10 s to 7 min
• Operating temperature: -20 °C to +40 °C
• Dimensions (W × D × H): 142 × 88 × 130 mm

How to use

Install the motion sensor according to local electrical regulations and the manufacturer’s instructions, ensuring the unit is mounted at a suitable height and oriented to cover the desired area within its 180° detection angle. Connect to a ~230 V / 50 Hz supply and the lighting or load circuit, observing the 1300 W maximum load rating. Adjust sensitivity, switch-on time and reaction time to suit the environment: increase sensitivity for low-light detection and lengthen timing if longer illumination is required. Verify correct operation after installation and make small adjustments as needed.

Usage recommendations

For reliable performance, avoid mounting the sensor near heat sources, air vents or in locations with frequent direct sunlight. Use in sheltered outdoor locations or indoors where IP44 protection is sufficient, and ensure wiring is carried out by a qualified electrician.