Slip-Resistant Paste Bisan 500 g bottle — anti-slip paste for surfaces

Bisan slip-resistant paste in a 500 g bottle is a viscous topical treatment formulated to increase surface traction. Designed for targeted application, the paste adheres to floors, steps, ramps and other walking areas to reduce the risk of slipping. The product is intended for use where improved grip is required on otherwise smooth or slightly worn surfaces and is applied as a thin, even layer to create a textured, anti-slip finish.

Advantages

The paste provides a practical way to improve surface traction without major structural changes. It is supplied as a ready-to-use viscous formulation that allows controlled application to specific areas. Because it dries to form a textured coating, it can be used selectively on problem spots such as stair nosings, ramp edges and transitional floor sections. The product is suitable for indoor and sheltered outdoor areas and is compatible with spot treatment strategies to reduce slip hazards in homes, workplaces and public spaces.

Suitable for

• Improving traction on indoor floors such as tiles, concrete and sealed wood
• Adding grip to stair treads and nosings
• Treating ramp surfaces and accessibility routes
• Spot-treating high-traffic or spill-prone areas

Key specifications

• Form: viscous paste supplied in a 500 g bottle
• Application type: topical coating for targeted areas
• Dry finish: textured, slip-resistant surface
• Suitable surfaces: hard, non-porous and sealed surfaces such as tile, concrete and treated wood
• Intended use: indoor and sheltered outdoor walking areas

How to use

Before application, clean the surface thoroughly to remove dirt, grease and loose particles and allow it to dry. Apply the paste in a thin, even layer using a spatula, trowel or suitable applicator, concentrating on edges, nosings and other areas with elevated slip risk. Allow the product to dry according to ambient conditions until a firm textured finish is obtained. Avoid heavy foot traffic until the coating is fully cured. For best results, test the paste on a small inconspicuous area to confirm adhesion and appearance on the specific surface.

Usage recommendations

Use appropriate personal protective equipment during application, such as gloves and eye protection. Do not apply on surfaces that are continuously submerged or subject to heavy abrasion. For outdoor use, apply in dry weather and avoid application at very low temperatures. Regularly inspect treated areas and reapply as needed in locations with high wear.