LED light strip BITFENIX Alchemy 2.0 600 mm, red, 30 LEDs, PVC/Cu/PUR

BitFenix Alchemy 2.0 600 mm red LED light strip is a 600 mm indoor lighting solution with 30 red LEDs arranged on a slim 10 mm wide, 2 mm thick substrate made from PVC, polyurethane (PUR) and copper conductors. Designed for low-voltage LED illumination inside PC cases and interior accents, this strip provides consistent red lighting for chassis lighting, backlighting and decorative illumination where compact, flexible installation is required.

Advantages

The flexible PUR/PVC construction with copper traces ensures reliable electrical continuity and long installation life in confined spaces. TriBright LED technology produces uniform, high-intensity red output with reduced banding and softer shadow transitions compared with narrow-angle LED modules. Built-in small magnets embedded in the strip allow secure attachment to steel surfaces without additional adhesives, and the narrow 10 mm profile enables placement behind trims, along drive bays or under shelves with minimal visual footprint.

Suitable for

• PC case interior lighting and accent illumination
• Backlighting for shelves, panels or displays
• Decorative lighting for small indoor projects and mods
• Reconfigurable lighting where magnetic mounting is preferred

Key specifications

• Length: 600 mm
• LED count: 30 red LEDs
• Materials: PVC, polyurethane (PUR) substrate with copper conductors
• Profile: approximately 10 mm width, 2 mm thickness
• Intended use: indoor low-voltage LED illumination

How to use

Clean the steel surface where the strip will be mounted to remove dust, oil or paint flakes for reliable magnetic contact. Route the strip in the desired position inside the case or interior space; the embedded magnets allow immediate attachment to ferrous surfaces. Connect the strip to an appropriate low-voltage LED power source or compatible controller following the manufacturer’s connection method and polarity requirements. Avoid bending the strip sharply; use gentle curves and ensure the copper conductors are not exposed or pinched during installation.

Usage recommendations

For best results, use the strip in dry indoor environments and pair it with compatible low-voltage LED controllers or switches that support single-color strips. Keep the strip and connectors away from strong heat sources and corrosive environments. When relocating or reusing the strip, inspect the magnets and substrate for wear and ensure connectors are clean before reattaching.