Speaker cable BITNER BiTsound PGY-p 2x1.5 mm 100 m

BITNER BiTsound PGY-p speaker cable 2x1.5 mm² on a 100 m spool is a twin-core low-voltage cable intended for connecting loudspeakers and audio systems in domestic, commercial or fixed-installation environments. The cable's 1.5 mm² conductor cross-section and parallel core layout provide a straightforward solution for short to medium length speaker runs where standard power and impedance requirements are met. The product is suitable for installations that require a reliable basic audio connection without special shielding or multi-channel trunking.

Advantages

The BITNER BiTsound PGY-p cable combines a compact twin-core design with a moderate conductor cross-section, enabling easy routing and handling during installation. Its 100 m spool reduces the need for multiple joins on a single installation run and allows installers to cut custom lengths on site. The cable offers consistent electrical characteristics across the reel, suitable for typical speaker loads in homes, small venues and commercial spaces.

Suitable for

• Wiring passive loudspeakers in residential audio systems
• Background music and paging systems in shops and offices
• Fixed installations in cafes, bars and small event spaces
• Short to medium distance connections between amplifiers and speakers

Key specifications

• Conductor configuration: twin-core (2 conductors)
• Conductor cross-section: 1.5 mm² per core
• Length: 100 m spool
• Intended use: low-voltage speaker/audio connections
• Typical installation: in-wall, surface routing or conduit where local codes permit

How to use

Measure the required run length and cut the cable from the 100 m spool using appropriate cable cutters. Strip insulation from each conductor to reveal the cores, then connect to speaker terminals and amplifier outputs, observing correct polarity to maintain phase. Secure the cable along the run using clips or ties and avoid tight bends or crushing forces that could damage the conductor or insulation. For in-wall installations, verify that the cable complies with local building and fire-safety regulations before concealment.

Usage recommendations

For best results, use this 2x1.5 mm² cable on short to medium runs where power requirements match the conductor size; for longer runs or higher-power applications consider increasing conductor cross-section to reduce voltage drop. Avoid running speaker cable in parallel with mains power cables to minimize interference, and always follow local installation codes and amplifier manufacturer guidance when making permanent installations.