Angle Grinder Black & Decker KG1202-QS 12.5 cm 11000 RPM 1200 W 2.7 kg

The Black & Decker KG1202-QS angle grinder is equipped with a 12.5 cm grinding disc and a 1,200 W motor that delivers up to 11,000 RPM. Designed for general-purpose grinding and surface preparation, this model combines a compact form factor with practical power for light to medium duty tasks. At 2.7 kg and with a 2 m power cable, the tool balances portability and reach while maintaining sufficient torque for abrasive wheels, cutting discs and wire brushes.

Advantages

The KG1202-QS provides a high motor output in a relatively lightweight housing, allowing for sustained operation on metal, masonry and composite surfaces. Its 12.5 cm disc diameter makes it suitable for precise grinding and cutting in confined spaces. The 2 m cable reduces the immediate need for extension leads on typical job sites, and the tool’s ergonomic contours and moderate weight help reduce operator fatigue during extended use.

Suitable for

• Grinding and smoothing welded joints and metal edges
• Cutting small metallic sections and rebar with appropriate discs
• Removing rust, paint and surface contaminants with wire brush or abrasive wheels
• Preparing masonry and concrete surfaces for repair or finishing

Key specifications

• Disc diameter: 12.5 cm
• Rated power: 1,200 W
• Maximum no-load speed: 11,000 RPM
• Weight: 2.7 kg
• Cable length: 2 m
• Colour: Black, Grey and Orange accents

How to use

Before use, fit an appropriate disc for the required task and ensure the guard is correctly positioned. Secure the workpiece and hold the grinder with both hands, one on the main body and the other on the auxiliary handle if fitted. Operate at steady contact pressure; avoid forcing the tool into the workpiece. Allow the disc to reach full speed before engaging the surface and move the grinder smoothly along the work area. After finishing, switch off the tool and wait for the disc to stop completely before setting it down or changing accessories.

Usage recommendations

Use discs and accessories rated for the grinder’s maximum speed. Wear appropriate personal protective equipment including eye protection, gloves, hearing protection and dust mask. For cutting tasks choose the correct disc type and ensure proper ventilation when working on coated surfaces. Regularly inspect discs for damage and replace them when worn or cracked.