Saw Blaupunkt CS4010

The Blaupunkt CS4010 is an electric chainsaw engineered for domestic and light professional cutting tasks. Equipped with a brushless motor delivering 2400 W of nominal power and a 40 cm guide bar, the CS4010 achieves a maximum motor speed of 7000 RPM and a chain speed of 13.5 m/s. Designed for 220–240 V AC, 50 Hz power supplies, the unit includes a 0.12-second chain brake for rapid stopping, an SDS tool-free chain tensioning and maintenance system, and an automatic chain lubrication system with an oil level indicator. With overall dimensions of 910 mm (width) × 275 mm (height) × 190 mm (length) and a weight of 4.75 kg, the saw balances compactness and durability for garden care and firewood preparation.

Advantages

The brushless motor increases efficiency and reduces wear compared with brushed designs, while the 2400 W rating and 40 cm blade length provide sufficient cutting capacity for beams, boards, branches and small trees. The SDS system allows tool-free chain installation and tensioning for faster service, and the automatic lubrication with a visible oil reservoir makes continuous operation simpler. A rapid-acting chain brake improves user safety in emergency situations. The comparatively low noise and zero on-site emissions typical of electric operation make the CS4010 suitable for work near homes and indoor tasks where petrol engines would be impractical.

Suitable for

• Pruning and cutting medium-diameter branches in gardens
• Preparing firewood and splitting logs for domestic heating
• Cutting beams and boards for small carpentry or renovation projects
• Clearing fallen wood and light tree removal

Key specifications

• Motor power: 2400 W (brushless)
• Guide bar length: 40 cm
• Maximum motor speed: 7000 RPM
• Chain speed: 13.5 m/s
• Power supply: 220–240 V AC, 50 Hz
• Chain brake activation time: 0.12 s
• Automatic chain lubrication with oil level indicator
• SDS tool-free chain tensioning and maintenance
• Weight: 4.75 kg
• Dimensions (W × H × L): 910 × 275 × 190 mm

How to use

Before use, check that the power supply matches the saw's voltage rating (220–240 V, 50 Hz), fill the oil reservoir and verify the level using the indicator, and ensure the chain is correctly fitted and tensioned using the SDS system. Hold the saw with both hands using the rubberised ergonomic handle, start the motor and allow it to reach operating speed before engaging the cut. Apply steady feed pressure appropriate to the material being cut and avoid forcing the saw. In the event of a kickback or emergency, the 0.12-second chain brake will stop the chain—release the trigger and engage the brake as needed. After use, disconnect from the power source, clean sawdust from the chain and guide bar, check lubrication level, and store the saw in a dry place.

Usage recommendations

For safe and optimal performance, use approved bar and chain oil in the lubrication reservoir, wear appropriate personal protective equipment (gloves, eye and hearing protection), secure or support workpieces to prevent binding, and avoid cutting above shoulder height. Regularly inspect the chain for wear and maintain correct tension with the SDS system. Do not operate the saw in wet conditions or where the power cable may be damaged; inspect the cable before each use.