Saw Bosch GTM 12 JL + GTA 2600

The Saw Bosch GTM 12 JL + GTA 2600 is a mitre saw designed for accurate crosscuts and angled cuts. Powered by an 1800 W motor and capable of a maximum idle speed of 3800 RPM, the tool combines cutting power with controlled blade rotation for consistent results. The saw accepts a blade with a diameter of 30.5 cm and a 3 cm bore, and its cutting capacity reaches 95 x 150 mm at 0° and 95 x 90 mm at 45°, making it suitable for a wide range of materials and common woodworking tasks.

Advantages

The saw offers dual-side mitre adjustment up to 48° left and right for flexible angle cutting, a robust motor for sustained performance, and a large blade diameter for deeper cross-sections. Its high no-load speed supports clean, efficient cuts, while the defined cutting capacities provide predictable results when working at 0° and 45°. The tool is configured for stability and precision in both professional and home workshop environments.

Suitable for

• Mitre and crosscutting of soft and hardwoods
• Making angled cuts for trim, moulding and framing
• Construction site tasks requiring repeatable angled cuts
• Carpentry and joinery where defined cutting depths are needed

Key specifications

• Motor power: 1800 W
• Maximum no-load speed: 3800 RPM
• Blade diameter: 30.5 cm
• Bore diameter: 3 cm
• Maximum mitre setting: 48° left / 48° right
• Cutting capacity at 0°: 95 x 150 mm
• Cutting capacity at 45°: 95 x 90 mm

How to use

Secure the saw to a stable bench or stand before operation and ensure the blade is appropriate for the material. Adjust the mitre angle to the required left or right setting up to 48° and set the bevel or cutting depth as required. Bring the material to the fence and clamp it firmly to prevent movement. Start the motor, allow the blade to reach full speed, then lower the saw head steadily through the cut, maintaining a consistent feed rate. After the cut is complete, raise the saw head and wait for the blade to stop before releasing the clamp and removing the workpiece.

Usage recommendations

Use appropriate blade types for the material (fine-tooth blades for finish cuts, coarser teeth for rough cuts), always wear eye and hearing protection, and use clamps to secure workpieces. Regularly check blade condition and alignment, and follow periodic maintenance for bearings and guards to ensure continued cutting accuracy and safe operation.