Angle Grinder Bosch GWX 14-125 Professional

The Bosch GWX 14-125 Professional angle grinder is a compact, high-performance tool designed for metalworking and construction tasks. It is powered by a 1400 W motor that delivers up to 11,000 RPM at no load and accepts a 125 mm (12.5 cm) grinding disc. With a lightweight construction of 2.3 kg and a durable housing finished in aluminium, black, blue and red, the GWX 14-125 balances power and handling for extended use on job sites and workshops. The tool's overall dimensions are approximately 298 mm in width and 102 mm in height, providing a narrow profile for close work and improved maneuverability.

Advantages

The 1400 W motor provides steady power for cutting, grinding and surface preparation, while the 11,000 RPM maximum speed allows efficient material removal and smooth operation with appropriate discs. The relatively low weight of 2.3 kg reduces user fatigue during prolonged use and makes the grinder easier to position in confined spaces. Durable construction and a compact design improve tool longevity and on-site reliability. The 125 mm disc size ensures broad accessory availability and compatibility with common abrasive and cutting wheels.

Suitable for

• Metal grinding, deburring and edge finishing
• Cutting metal pipe, rebar and sheet metal
• Removing rust, paint and weld spatter with wire or abrasive discs
• Masonry grinding and light surface preparation with appropriate discs
• Workshop and construction site maintenance tasks

Key specifications

• Motor power: 1400 W
• Maximum no-load speed: 11,000 RPM
• Grinding disc diameter: 125 mm (12.5 cm)
• Weight: 2.3 kg
• Housing colours: aluminium, black, blue, red
• Approximate dimensions: 298 mm (width) × 102 mm (height)

How to use

Before use, ensure the workpiece is secured and the correct disc for the task is fitted and tightened according to the manufacturer's instructions. Connect the grinder to a suitable mains supply and hold it firmly with both hands using the main handle and auxiliary handle when required. Allow the motor to reach full speed before applying the disc to the work surface, and use steady, controlled movements. Maintain an appropriate angle and light pressure to avoid overloading the motor or disc. After finishing, switch off the tool and wait until the disc stops completely before setting the grinder down.

Usage recommendations

Use discs and accessories that match the 125 mm diameter and rated speed of the machine. Wear appropriate personal protective equipment including eye, ear and respiratory protection and gloves. Avoid side loads on cutting discs, follow the safety instructions supplied with the tool, and allow for regular inspection and replacement of worn parts to maintain performance and safety.