Jigsaw Bosch PST 700 E 500 W, cutting depth wood 70 mm, steel 4 mm, bevel 0–45°, 1.7 kg

The Bosch PST 700 E is a handheld electric jigsaw designed for common straight and bevel cuts in wood, plastics and thin metals. With a 500 W input motor (approximately 300 W output) and a no-load stroke rate of up to 3100 spm, the tool delivers consistent cutting performance for light to medium tasks. It offers a maximum cutting depth of 70 mm in wood and 4 mm in non-alloyed steel, and supports bevel cuts from 0° to 45°. The compact design and a weight of 1.7 kg make the saw easy to handle during extended work sessions and when making angled cuts.

Advantages

The jigsaw balances power and portability: a 500 W motor provides sufficient cutting speed while the 1.7 kg weight reduces operator fatigue. Variable stroke rate up to 3100 spm enables control over cut speed and finish for different materials. The bevel-adjustable sole plate (0–45°) expands cutting versatility for mitres and angled joints. A cutting depth of 70 mm in wood covers most common woodworking tasks, while the 4 mm capacity in non-alloyed steel allows light metalwork and fitting operations.

Suitable for

• Straight and curved cuts in soft and hard wood
• Cutting plastic panels and laminates
• Light metal cutting and trimming in non-alloyed steel
• Bevel and mitre cuts up to 45° for joinery and trim work
• On-site DIY and renovation tasks requiring a compact handheld saw

Key specifications

• Input power: 500 W (nominal)
• No-load stroke rate: up to 3100 spm
• Maximum cutting depth in wood: 70 mm
• Maximum cutting depth in non-alloyed steel: 4 mm
• Bevel capacity: 0° to 45°
• Weight: 1.7 kg
• Power source: mains (AC)

How to use

Secure the workpiece and mark the cutting line before starting. Fit a blade suitable for the material and ensure it is properly seated and tightened. Plug the saw into a mains supply, set the desired bevel angle and stroke rate according to material and finish requirements, then start the cut with a firm, steady feed without forcing the tool. For curved cuts, guide the jigsaw slowly along the layout; for bevel cuts maintain the set angle and support the workpiece to prevent vibration. After cutting, release the switch, wait for the blade to stop, then disconnect from the mains and allow the tool to cool before changing blades or storing.

Usage recommendations

Use blades matched to the material (coarse-tooth blades for fast wood removal, fine-tooth blades for smooth finishes and metal). Wear appropriate personal protective equipment, clamp workpieces securely, and allow the tool to reach full speed before engaging the cut. Regularly check blade condition and keep the sole plate clean to maintain cutting accuracy.