Rotary hammer Bosch GBH 2-28 F Professional — 880 W, SDS‑Plus, 3.2 J impact, 4 m cord, 3.1 kg

Perforator Bosch GBH 2-28 F Professional is a rotary hammer designed for drilling and chiselling in concrete, masonry and similar materials. It is equipped with an 880 W motor, SDS Plus chuck for quick bit changes, and delivers up to 3.2 J impact energy with a maximum speed of 900 RPM. The tool weighs 3.1 kg and has a 4 m power cord, offering a balance of power and maneuverability for professional and DIY tasks.

Advantages

The GBH 2-28 F Professional combines a high-power 880 W motor with an SDS Plus system for fast, tool-free bit changes. Its 3.2 J impact energy and maximum speed of 900 RPM provide efficient drilling in concrete up to 28 mm. The tool includes Bosch’s KickBack Control intelligent safety feature to reduce the risk of sudden reaction torque. With a weight of 3.1 kg and a 4 m cord, it is suitable for extended use while remaining portable.

Suitable for

• Drilling holes in concrete and masonry (up to 28 mm)
• Light chiselling and demolition work
• Installing anchors and fixing systems
• General construction and renovation tasks

Key specifications

• Brand: Bosch
• Model: GBH 2-28 F Professional
• Motor power: 880 W
• Impact energy: 3.2 J
• Max speed: 900 RPM
• Chuck type: SDS Plus
• Max drilling diameter in concrete: 28 mm
• Weight: 3.1 kg
• Power cord length: 4 m
• MPN: 0611267600
• EAN: 3165140843652

How to use

Select an appropriate SDS Plus bit and insert it into the chuck until it locks. Choose the drilling or chiselling mode on the mode selector. Hold the perforator with both hands, apply steady pressure and start at low speed to position the hole, then increase speed as needed. For chiselling, use short, controlled impulses and allow the tool to do the work. Disconnect power before changing bits or performing maintenance.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses, ear protection and dust mask. For best results when drilling in concrete, use carbide-tipped bits rated for SDS Plus and ensure the work surface is clear of loose debris. If the tool kicks back or binds, stop immediately and check bit condition and alignment.